These are eight matching antique door hardware sets with doorknobs and matching plates, circa 1910. The doorplates feature a rectangular shape with an arch at the top and  More »

These are eight matching antique door hardware sets with doorknobs and matching plates, circa 1910. The doorplates feature a rectangular shape with an arch at the top and bottom; each is ornamented with an elegant Neoclassical volute design, with a raised panel in the middle of the plate. The knobs have a fourfold design with volutes surrounding a raised center. This door hardware is in excellent condition. The door knobs measure 2 ¼” in diameter and 2 ¼” deep; the plates are 2 ½” by 7 ½”. Each hardware set consists of a pair of doorknobs with the connecting rod, screws, and two backplates. THE PRICE LISTED IS FOR EACH SET; THERE ARE NOW 6 SETS AVAILABLE. These would work beautifully with either our modern latch set or antique mortise locks (item # NML1, NML2, or NML3). NDKS55-RW   « Less

For sale is a Replacement Heat Cap made especially for Original Tiffany Studios, New York shades that require this size. The Heat Cap has a wonderful Tiffany style Verdi  More »

For sale is a Replacement Heat Cap made especially for Original Tiffany Studios, New York shades that require this size. The Heat Cap has a wonderful Tiffany style Verdi Patina. The base metal is Brass that was copper plated and a Green Patina Applied. These would be known a Gilt Bronze. Thge Heat Cap stands 3 1/2" tall and the inside diameter or slip fit is 5 3/16". The outside diameter is 5 1/2". If your neck on the ring outside measurement fits between 5" to 5 3/16" then this Teardrop Heat Cap will work. The Heat Cap displays a wonderful and earthy Verdi green Patina and it is what we call a Teardrop Shape. It was designed to fit 22" Tiffany Original and Replica shades such as the Peony, Hanging Head Dragonfly and Laburnum as well as the 22" Geometrics. If your raised neck on the ring on the top of the shade measures between 5" to 5 3/16" outside measurement then this Teardrop Heat Cap will work. You can also use this heat cap on other early manufacturers shades such as Wilkinson, Duffner & Kimberly, Unique, Bradley + Hubbard, Handel, Pairpoint, Miller, Pittsburgh as long as their opening is the same. This Heat Cap is designed to just slide over the raised lip in the aperture of the shade. I can modify it to be hard mounted if you need to for an additional charge. The quality level is that of Tiffany Studios, New York quality. So if you have an original Tiffany shade that requires the use of this cap and have been unable to find an original look no further!! This looks exactly like the real deal! The Tear Drop Heat Cap in near perfect condition as there are no scratches, dents or dings! INCLUDES SHIPPING   « Less

For sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 2 1/2" but the actual shade riser size is 1 3/4". This  More »

For sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 2 1/2" but the actual shade riser size is 1 3/4". This means it would raise the shade above the ball that house the electrical arms 1 3/4". This was a simple means of raising the shade to properly fit a Tiffany Shade to the Base where the Cluster Ball housing the arms and sockets with light bulbs in them. The Bronze riser has a wonderful Verdi/Green Brown Patina. It displays the male thread on the top where the Shade Wheel would screw down on. The riser is also tapped to receive a 8/32 Stem thread. This is the thread that came out of the bottom of the Heat Cap. The shade would sit on the wheel and you would lock the shade to the base by screwing the cap into the riser. This was a wonderfully engineered feature of Tiffany Studios lamps. You could actually turn the base upside down and the shade wouldn't fall off. This riser will only fit a base that has a ball tapped to receive 1"-18 Thread in the cluster and 1/8" IPS on the top. Do not attempt to use this on any other as it will more than likely strip the threads in the ball of cluster. This Riser is in newly produced and is in excellent unused condition. This riser can also work in other period lamps made by Duffner & Kimberly, Gorham, Bradley & Hubbard, Chicago Mosaic, Wilkinson and so many others. The cluster ball must be tapped to receive the specifications above. I have other sizes if you need them Please email me at my email address below and I will get back to you promptly THIS INCLUDES SHIPPING   « Less

Antique door hardware set, circa 1900, with doorknobs, backplates, and mortise locks. The door knobs feature a gorgeous eightfold flower design, and the doorplates feature a  More »

Antique door hardware set, circa 1900, with doorknobs, backplates, and mortise locks. The door knobs feature a gorgeous eightfold flower design, and the doorplates feature a trefoil border with scrolls and leaves at the top and bottom. The back of each plate is signed “Ideal.” These doorknob sets are in excellent working condition. The door knobs measure 2 1/8” in diameter and 2” deep; the plates are 7 ¼” x 2”; the plate on the mortise lock is 7/8” wide and 5 5/8” long. Each set includes a pair of plates, one mortise lock, and two knobs with the connecting spindle and set screws (enough hardware for one door). ONE AVAILABLE!!! NDKS59-RW   « Less

Antique 2” chrome hinges for a transom, cabinet, or small door, probably from the 1920’s or 1930’s. The hinges are signed Lawrence. These hinges are new  More »

Antique 2” chrome hinges for a transom, cabinet, or small door, probably from the 1920’s or 1930’s. The hinges are signed Lawrence. These hinges are new old stock and have never been used. Each hinge measures 2” x 2”, and 2 7/8” tall overall (from finial to finial). THE PRICE LISTED IS FOR EACH PAIR; THERE ARE NOW FOUR PAIRS AVAILABLE. NHP27   « Less

Rare antique fleur-de-lis door hardware sets with knobs and plates, in Reading Hardware’s “Fleuroy” design, c. 1910. The doorknobs feature a threefold  More »

Rare antique fleur-de-lis door hardware sets with knobs and plates, in Reading Hardware’s “Fleuroy” design, c. 1910. The doorknobs feature a threefold fleur de lys design, and the doorplates are ornamented with a fleur-de-lis on both the top and the bottom. The door knobs measure 2 ¼” in diameter and 2 ¼” deep; the plates are 2 1/2” by 8”. Each set includes a pair of doorknobs with the connecting rod and set screws, and a pair of doorplates (enough hardware for one door). THE PRICE LISTED IS FOR EACH SET; THERE ARE 4 SETS AVAILABLE. Antique locks or modern latches for use with these sets are also available. NDKS72-RW   « Less

A pair of antique cast iron 3” hinges with ball finials, dating from the 19th Century. Each hinge is ornamented with a delightful design of stylized leaves and vines.  More »

A pair of antique cast iron 3” hinges with ball finials, dating from the 19th Century. Each hinge is ornamented with a delightful design of stylized leaves and vines. These Eastlake hinges are in excellent condition. Each hinge measures 3” wide overall, 3” tall, and 4 ¼” from finial to finial. Matching hinges are available under item # NHP20, NHP47, and NHP48. NHP35   « Less

A charming antique cast iron 4.5” hinge with steeple finials, dating from the 19th Century. The three-knuckle hinge features a striking geometric design on the leaves,  More »

A charming antique cast iron 4.5” hinge with steeple finials, dating from the 19th Century. The three-knuckle hinge features a striking geometric design on the leaves, with the knuckles ornamented both front and back. This Eastlake hinge is in excellent condition and has been lacquered to protect the finish. The hinge measures 4 ½” wide overall, 4 1/2” tall, and 7 1/4” from finial to finial. NHP42   « Less

Antique door hardware sets in Norwalk’s “Wilton” pattern, circa 1910. The doorplates feature a leaf at the top and bottom, with a subtle scroll detail in  More »

Antique door hardware sets in Norwalk’s “Wilton” pattern, circa 1910. The doorplates feature a leaf at the top and bottom, with a subtle scroll detail in the border. The doorknobs feature a fourfold volute pattern. These doorknob sets are in very good antique condition with a nicely aged finish. The hardware has been lacquered to prevent rust. The door knobs measure 2 1/8” in diameter and 2 1/8” deep; the plates are 7 1/4” by 2 3/8”. Each set includes a pair of doorknobs with the connecting rod and set screws, and a pair of doorplates (enough hardware for one door). THE PRICE LISTED IS FOR EACH SET; THERE ARE 12 SETS AVAILABLE. Antique mortise locks or modern latches for use with these sets are also available. NDKS74-RW   « Less

A charming decorative antique cast iron 3 ½”” hinge with ball finials, dating from the 19th Century. The three-knuckle hinge features an elegant scroll design  More »

A charming decorative antique cast iron 3 ½”” hinge with ball finials, dating from the 19th Century. The three-knuckle hinge features an elegant scroll design on a textured background, with an abstract design along the knuckles of the hinge on both the front and back. This Eastlake hinge is in excellent condition and has been lacquered to protect the finish. The hinge measures 3” wide overall, 3-1/2” tall, and 5” from finial to finial. NHP55   « Less