W9-9101 12" BIRCH WOOD REPLACEMENT CHAIR SEAT BOARD.

W9-9101 12" BIRCH WOOD REPLACEMENT CHAIR SEAT BOARD.   « Less

VICTORIAN STYLE BAIL PULL,CAST BRASS BAIL ONLY ,1 13/16"high x 3 3/4"wide Centers - 3",(Requires 2 Eyebolts and 2 Backplates, NOT INCLUDED).

VICTORIAN STYLE BAIL PULL,CAST BRASS BAIL ONLY ,1 13/16"high x 3 3/4"wide Centers - 3",(Requires 2 Eyebolts and 2 Backplates, NOT INCLUDED).   « Less

VICTORIAN STYLE BAIL PULL, CAST BRASS DRAWER HARDWARE ,1 3/4"h x 5"w Centers - 3",Includes 2 Eyebolts and 2 Stamped Brass Backplates.

VICTORIAN STYLE BAIL PULL, CAST BRASS DRAWER HARDWARE ,1 3/4"h x 5"w Centers - 3",Includes 2 Eyebolts and 2 Stamped Brass Backplates.   « Less

For sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 3 1/4" but the actual riser size is 2 1/2". This means  More »

For sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 3 1/4" but the actual riser size is 2 1/2". This means it would raise the shade above the ball that house the electrical arms 2 1/2". This was a simple means of raising the shade to properly fit a Tiffany Shade to the Base where the Cluster Ball housing the arms and sockets with light bulbs in them. The Bronze riser has a wonderful Verdi/Green Brown Patina. It displays the male thread on the top wheel the Shade Wheel would screw down on. The riser is also tapped to receive a 8/32 Stem thread. This is the thread that came out of the bottom of the Heat Cap. The shade would sit on the wheel and you would lock the shade to the base by screwing the cap into the riser. This was a wonderfully engineered feature of Tiffany Studios lamps. You could actually turn the base upside down and the shade wouldn't fall off. This riser will only fit a base that has a ball tapped to receive 1"-18 Thread in the cluster and 1/8" IPS on the top. Do not attempt to use this on any other as it will more than likely strip the threads in the ball of cluster. This Riser is in newly produced and is in excellent unused condition. This riser can also work in other period lamps made by Duffner & Kimberly, Gorham, Bradley & Hubbard, Chicago Mosaic, Wilkinson and so many others. The cluster ball must be tapped to receive the specifications above. I have other sizes if you need them Please email me at my email address below and I will get back to you promptly. THIS INCLUDES SHIPPING   « Less

For sale is a Replacement Heat Cap made especially for Original Tiffany Studios, New York shades that require this size. The Heat Cap has a wonderful Tiffany style Verdi  More »

For sale is a Replacement Heat Cap made especially for Original Tiffany Studios, New York shades that require this size. The Heat Cap has a wonderful Tiffany style Verdi Patina. The base metal is Brass that was copper plated and a Green Patina Applied. These would be known a Gilt Bronze. Thge Heat Cap stands 3 1/2" tall and the inside diameter or slip fit is 5 3/16". The outside diameter is 5 1/2". If your neck on the ring outside measurement fits between 5" to 5 3/16" then this Teardrop Heat Cap will work. The Heat Cap displays a wonderful and earthy Verdi green Patina and it is what we call a Teardrop Shape. It was designed to fit 22" Tiffany Original and Replica shades such as the Peony, Hanging Head Dragonfly and Laburnum as well as the 22" Geometrics. If your raised neck on the ring on the top of the shade measures between 5" to 5 3/16" outside measurement then this Teardrop Heat Cap will work. You can also use this heat cap on other early manufacturers shades such as Wilkinson, Duffner & Kimberly, Unique, Bradley + Hubbard, Handel, Pairpoint, Miller, Pittsburgh as long as their opening is the same. This Heat Cap is designed to just slide over the raised lip in the aperture of the shade. I can modify it to be hard mounted if you need to for an additional charge. The quality level is that of Tiffany Studios, New York quality. So if you have an original Tiffany shade that requires the use of this cap and have been unable to find an original look no further!! This looks exactly like the real deal! The Tear Drop Heat Cap in near perfect condition as there are no scratches, dents or dings! INCLUDES SHIPPING   « Less

For sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 2 1/2" but the actual shade riser size is 1 3/4". This  More »

For sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 2 1/2" but the actual shade riser size is 1 3/4". This means it would raise the shade above the ball that house the electrical arms 1 3/4". This was a simple means of raising the shade to properly fit a Tiffany Shade to the Base where the Cluster Ball housing the arms and sockets with light bulbs in them. The Bronze riser has a wonderful Verdi/Green Brown Patina. It displays the male thread on the top where the Shade Wheel would screw down on. The riser is also tapped to receive a 8/32 Stem thread. This is the thread that came out of the bottom of the Heat Cap. The shade would sit on the wheel and you would lock the shade to the base by screwing the cap into the riser. This was a wonderfully engineered feature of Tiffany Studios lamps. You could actually turn the base upside down and the shade wouldn't fall off. This riser will only fit a base that has a ball tapped to receive 1"-18 Thread in the cluster and 1/8" IPS on the top. Do not attempt to use this on any other as it will more than likely strip the threads in the ball of cluster. This Riser is in newly produced and is in excellent unused condition. This riser can also work in other period lamps made by Duffner & Kimberly, Gorham, Bradley & Hubbard, Chicago Mosaic, Wilkinson and so many others. The cluster ball must be tapped to receive the specifications above. I have other sizes if you need them Please email me at my email address below and I will get back to you promptly THIS INCLUDES SHIPPING   « Less

These are fantastic reversible strap hinges with a remarkable shape, copied from original antique straps from our collection. The original hinges can be seen here. They  More »

These are fantastic reversible strap hinges with a remarkable shape, copied from original antique straps from our collection. The original hinges can be seen here. They feature a wonderful black finish. Each strap is made in the United States and measures 29-3/8” long and 13-3/8” wide. THE PRICE LISTED IS PER STRAP; THERE ARE TWO AVAILABLE. If you need more straps than the available quantity, we are able to special order additional straps though it could take up to several weeks; please contact us for more information. Additional coordinating straps available under item NSH13-RW.   « Less

These are fantastic reversible strap hinges with a remarkable shape, copied from original antique straps from our collection. The original hinges can be seen here. They  More »

These are fantastic reversible strap hinges with a remarkable shape, copied from original antique straps from our collection. The original hinges can be seen here. They feature a wonderful black finish. Each strap is made in the United States and measures 29-3/8" long and 16-1/2” wide. THE PRICE LISTED IS PER STRAP; THERE IS NOW ONE AVAILABLE. If you need more straps than the available quantity, we are able to special order additional straps though it could take up to several weeks; please contact us for more information. Additional coordinating straps available under item NSH12-RW.   « Less

For Sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 4 1/2" but the actual shade riser size is 3 3/4". This  More »

For Sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 4 1/2" but the actual shade riser size is 3 3/4". This is a large shade riser! This means it would raise the shade above the ball that house the electrical arms 3 3/4". This was a simple means of raising the shade to properly fit a Tiffany Shade to the Base where the Cluster Ball housing the arms and sockets with light bulbs in them. The Bronze riser has a wonderful Verdi/Green Brown Patina. It displays the male thread on the top where the Shade Wheel would screw down on. The riser is also tapped to receive a 8/32 Stem thread. This is the thread that came out of the bottom of the Heat Cap. The shade would sit on the wheel and you would lock the shade to the base by screwing the cap into the riser. This was a wonderfully engineered feature of Tiffany Studios lamps. You could actually turn the base upside down and the shade wouldn't fall off. This riser will only fit a base that has a ball tapped to receive 1"-18 Thread in the cluster and 1/8" IPS on the top. Do not attempt to use this on any other as it will more than likely strip the threads in the ball of cluster. This Riser is in newly produced and is in excellent unused condition. This riser can also work in other period lamps made by Duffner & Kimberly, Gorham, Bradley & Hubbard, Chicago Mosaic, Wilkinson and so many others. The cluster ball must be tapped to receive the specifications above. I have other sizes if you need them Please email me at my email address below and I will get back to you promptly. SHIPPING INCLUDED   « Less

For Sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 2 1/4" but the actual shade riser size is 1 1/4". This  More »

For Sale is a Bronze Riser made for a replacement part for Tiffany Studios lamp bases. The actual size of the riser is 2 1/4" but the actual shade riser size is 1 1/4". This means it would raise the shade above the ball that house the electrical arms 1 1/4". This was a simple means of raising the shade to properly fit a Tiffany Shade to the Base where the Cluster Ball housing the arms and sockets with light bulbs in them. The Bronze riser has a wonderful Verdi/Green Brown Patina. It displays the male thread on the top where the Shade Wheel would screw down on. The riser is also tapped to receive a 8/32 Stem thread. This is the thread that came out of the bottom of the Heat Cap. The shade would sit on the wheel and you would lock the shade to the base by screwing the cap into the riser. This was a wonderfully engineered feature of Tiffany Studios lamps. You could actually turn the base upside down and the shade wouldn't fall off. This riser will only fit a base that has a ball tapped to receive 1"-18 Thread in the cluster and 1/8" IPS on the top. Do not attempt to use this on any other as it will more than likely strip the threads in the ball of cluster. This Riser is in newly produced and is in excellent unused condition. This riser can also work in other period lamps made by Duffner & Kimberly, Gorham, Bradley & Hubbard, Chicago Mosaic, Wilkinson and so many others. The cluster ball must be tapped to receive the specifications above. I have other sizes if you need them Please email me at my email address below and I will get back to you promptly. SHIPPING INCLUDED   « Less