LARGE TUFTED FIBER REPLACEMENT SEAT. Tufted Pattern - Pattern size: Front 13-1/4"; Back 10-1/4"; Depth 12-3/8" - Untrimmed Size - 15-3/4" square. The suggested minimum trim  More »

LARGE TUFTED FIBER REPLACEMENT SEAT. Tufted Pattern - Pattern size: Front 13-1/4"; Back 10-1/4"; Depth 12-3/8" - Untrimmed Size - 15-3/4" square. The suggested minimum trim size for this seat is 1 inch greater than the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the pattern is as much as 3/16" off center. These Chair Seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recomment using a scrap piece of seatboard to test the results.We also carry Decorative Nails. To determine the number of nails necessary, plan on using one nail every 3/4" to 1 1/2". For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

LARGE TUFTED FIBER REPLACEMENT SEAT, Round Tufted Pattern - Pattern size: 13-1/2" diameter - Untrimmed Size 18" square. The suggested minimum trim size for this seat is 1  More »

LARGE TUFTED FIBER REPLACEMENT SEAT, Round Tufted Pattern - Pattern size: 13-1/2" diameter - Untrimmed Size 18" square. The suggested minimum trim size for this seat is 1 inch greater than the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the pattern is as much as 3/16" off center. These Chair Seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recomment using a scrap piece of seatboard to test the results.We also carry Decorative Nails. To determine the number of nails necessary, plan on using one nail every 3/4" to 1 1/2". For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

TUFTED FIBER REPLACEMENT SEAT. Round Tufted Pattern - Pattern size: 10-1/2" diameter - Untrimmed Size 14-1/2" square. The suggested minimum trim size for this seat is 1 inch  More »

TUFTED FIBER REPLACEMENT SEAT. Round Tufted Pattern - Pattern size: 10-1/2" diameter - Untrimmed Size 14-1/2" square. The suggested minimum trim size for this seat is 1 inch greater than the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the pattern is as much as 3/16" off center. These Chair Seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recomment using a scrap piece of seatboard to test the results.We also carry Decorative Nails. To determine the number of nails necessary, plan on using one nail every 3/4" to 1 1/2". For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

TUFTED FIBER REPLACEMENT SEAT. Tufted Pattern - Pattern size: Front 11-3/4"; Back 9-1/2"; Depth 11-3/8" - Untrimmed Size - 14-1/2" square. The suggested minimum trim size for  More »

TUFTED FIBER REPLACEMENT SEAT. Tufted Pattern - Pattern size: Front 11-3/4"; Back 9-1/2"; Depth 11-3/8" - Untrimmed Size - 14-1/2" square. The suggested minimum trim size for this seat is 1 inch greater than the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the pattern is as much as 3/16" off center. These Chair Seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recomment using a scrap piece of seatboard to test the results.We also carry Decorative Nails. To determine the number of nails necessary, plan on using one nail every 3/4" to 1 1/2". For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

FIBER REPLACEMENT SEAT, Round Hearts Pattern - Pattern size: 12-1/2" diameter - Untrimmed Size 15" square, The suggested minimum trim size for this seat is 1 inch greater  More »

FIBER REPLACEMENT SEAT, Round Hearts Pattern - Pattern size: 12-1/2" diameter - Untrimmed Size 15" square, The suggested minimum trim size for this seat is 1 inch greater than the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the pattern is as much as 3/16" off center. These Chair Seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recomment using a scrap piece of seatboard to test the results.We also carry Decorative Nails. To determine the number of nails necessary, plan on using one nail every 3/4" to 1 1/2". For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

BIRCH BENDABLE REPLACEMENT SEAT BOARD,Bendable Birch Plywood seat 30 x 24 x 5/32" thick.,Birch seat boards are sold untrimmed due to the different shapes and various sizes of  More »

BIRCH BENDABLE REPLACEMENT SEAT BOARD,Bendable Birch Plywood seat 30 x 24 x 5/32" thick.,Birch seat boards are sold untrimmed due to the different shapes and various sizes of chairs to be fitted.,They can be cut with a band saw, scroll saw or saber saw.   « Less

BIRCH REPLACEMENT SEAT BOARD, STAR PATTERN, Star Pattern Drilled Seat Boards 19-7/8" sq. Approx. size Pattern Dia. 10", Birch seat boards are sold untrimmed due to the  More »

BIRCH REPLACEMENT SEAT BOARD, STAR PATTERN, Star Pattern Drilled Seat Boards 19-7/8" sq. Approx. size Pattern Dia. 10", Birch seat boards are sold untrimmed due to the different shapes and various sizes of chairs to be fitted. They can be cut with a band saw, scroll saw or saber saw. We also carry Decorative Nails. To determine the number of nails necessary, plan on spacing nails from 3/4" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

BIRCH REPLACEMENT SEAT BOARD, STAR PATTERN, Star Pattern Drilled Seat Boards 14-7/8" sq. Approx. size Pattern Dia. 10", Birch seat boards are sold untrimmed due to the  More »

BIRCH REPLACEMENT SEAT BOARD, STAR PATTERN, Star Pattern Drilled Seat Boards 14-7/8" sq. Approx. size Pattern Dia. 10", Birch seat boards are sold untrimmed due to the different shapes and various sizes of chairs to be fitted. They can be cut with a band saw, scroll saw or saber saw. We also carry Decorative Nails. To determine the number of nails necessary, plan on spacing nails from 3/4" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

BIRCH REPLACEMENT SEAT BOARD, STAR PATTERN, Star Pattern Drilled Seat Boards 11-7/8" sq. Approx. size Pattern Dia. 8". Birch seat boards are sold untrimmed due to the  More »

BIRCH REPLACEMENT SEAT BOARD, STAR PATTERN, Star Pattern Drilled Seat Boards 11-7/8" sq. Approx. size Pattern Dia. 8". Birch seat boards are sold untrimmed due to the different shapes and various sizes of chairs to be fitted. They can be cut with a band saw, scroll saw or saber saw. We also carry Decorative Nails. To determine the number of nails necessary, plan on spacing nails from 3/4" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less

BIRCH REPLACEMENT SEAT BOARD, CIRCLE PATTERN. Circle Pattern Drilled Seat Board 19 7/8" sq. approx. size Pattern Dia. 10". Birch seat boards are sold untrimmed due to the  More »

BIRCH REPLACEMENT SEAT BOARD, CIRCLE PATTERN. Circle Pattern Drilled Seat Board 19 7/8" sq. approx. size Pattern Dia. 10". Birch seat boards are sold untrimmed due to the different shapes and various sizes of chairs to be fitted. They can be cut with a band saw, scroll saw or saber saw. We also carry Decorative Nails. To determine the number of nails necessary, plan on spacing nails from 3/4" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.   « Less