|
Reproduction Hardware
|
|
 |
|
|
|
Price :
$13.67
IMITATION HARDWOOD, DESK DRAWER PULLS, 7-1/4" wide x 2-7/8" high, 1-1/4" Projection, Not Tapped or Drilled, This walnut looking hardware is made of a strong lightweight resin More »
IMITATION HARDWOOD, DESK DRAWER PULLS, 7-1/4" wide x 2-7/8" high, 1-1/4" Projection, Not Tapped or Drilled, This walnut looking hardware is made of a strong lightweight resin material. An exact copy of an original carved wood pull, the process picks up the grain, of the wood in detail. Once installed it looks like real carved walnut. INSTALLATION INSTRUCTIONS, Front mount: Scuff sand the back, apply glue, position and clamp or weight until glue dries. If Clamping or weighting is not possible, hold in place by nailing with brads Pre-drill nail holes. Counter sink brads and fill with putty. Rear Mount: Pre-drill proper size holes and attach from back with screws. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$8.79
IMITATION HARDWOOD, DESK DRAWER PULLS, ,5-5/8" wide x 2-1/4" high, 1-1/8" Projection, Not Tapped or Drilled, This walnut looking hardware is made of a lightweight resin More »
IMITATION HARDWOOD, DESK DRAWER PULLS, ,5-5/8" wide x 2-1/4" high, 1-1/8" Projection, Not Tapped or Drilled, This walnut looking hardware is made of a lightweight resin material. An exact copy of an original carved wood pull, the process picks up the grain, of the wood in detail. Once installed it looks like real carved walnut. INSTALLATION INSTRUCTIONS, Front mount: Scuff sand the back, apply glue, position and clamp or weight until glue dries. If Clamping or weighting is not possible, hold in place by nailing with brads Pre-drill nail holes. Counter sink brads and fill with putty. Rear Mount: Pre-drill proper size holes and attach from back with screws. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$2.99
ANTIQUE FINISH VERTICAL,OVAL KEYHOLE COVER / ESCUTCHEON, DIE CAST ZINC ALLOY WITH OLD WORLD BRASS FINISH,1-1/32" wide x 1-15/32" high, Includes escutcheon Pins.
ANTIQUE FINISH VERTICAL,OVAL KEYHOLE COVER / ESCUTCHEON, DIE CAST ZINC ALLOY WITH OLD WORLD BRASS FINISH,1-1/32" wide x 1-15/32" high, Includes escutcheon Pins. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$1.65
HARDWOOD VICTORIAN KEYHOLE COVER,1-1/16" Diameter,Note: Wood products may need additional sanding before finishing.
HARDWOOD VICTORIAN KEYHOLE COVER,1-1/16" Diameter,Note: Wood products may need additional sanding before finishing. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$1.39
HARDWOOD VICTORIAN KEYHOLE COVER,1-1/16" Diameter,Note: Wood products may need additional sanding before finishing.
HARDWOOD VICTORIAN KEYHOLE COVER,1-1/16" Diameter,Note: Wood products may need additional sanding before finishing. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$2.49
HARDWOOD VICTORIAN KEYHOLE COVER,1-1/4" Square,Note: Wood products may need additional sanding before finishing.
HARDWOOD VICTORIAN KEYHOLE COVER,1-1/4" Square,Note: Wood products may need additional sanding before finishing. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$2.79
HARDWOOD VICTORIAN BEEHIVE KEYHOLE COVER,1-5/16" Diameter,Note: Wood products may need additional sanding before finishing.
HARDWOOD VICTORIAN BEEHIVE KEYHOLE COVER,1-5/16" Diameter,Note: Wood products may need additional sanding before finishing. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$4.87
Hardwood Cupboard Turnknob/Latch with Catch,Hardwood Knob 1 1/4"dia. Shaft: 1 1/4" Long x 5/16" dia.,Catch: 2 1/4"long x 3/4"w x 3/8"thick Tapers from 3/8" to 1/8",Locking More »
Hardwood Cupboard Turnknob/Latch with Catch,Hardwood Knob 1 1/4"dia. Shaft: 1 1/4" Long x 5/16" dia.,Catch: 2 1/4"long x 3/4"w x 3/8"thick Tapers from 3/8" to 1/8",Locking Screw Included. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$1.19
Stamped Brass Oval Keyhole Insert,Overall 15/16" high x 1/2" wide,Opening 5/8" high x 1/4" wide.
Stamped Brass Oval Keyhole Insert,Overall 15/16" high x 1/2" wide,Opening 5/8" high x 1/4" wide. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$14.97
SELLERS STYLE, RIGHT HAND CABINET LATCH, POLISHED BRASS (ALSO AVAILABLE IN NICKEL PLATED BRASS), Base 2 1/4"high x 1 1/8"wide Overall 2 1/16"wide Catch Base 1 1/2"high x More »
SELLERS STYLE, RIGHT HAND CABINET LATCH, POLISHED BRASS (ALSO AVAILABLE IN NICKEL PLATED BRASS), Base 2 1/4"high x 1 1/8"wide Overall 2 1/16"wide Catch Base 1 1/2"high x 3/8"wide, Comes with a set of 2 catches for flush mount or 3/8" offset. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
|
|
|
