Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1329)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Additional Information: Necklace consisting of genuine Egyptian New Kingdom  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Additional Information: Necklace consisting of genuine Egyptian New Kingdom faience beads and an 18 karat gold ankh and an 18 karat gold clasp. Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1332)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1337)   « Less

Necklace Of An Egyptian Scarab,Beads & Faience - FJ.1369 Origin: Egypt (Sinai) Circa: 1575 BC to 1100 BC Collection: Egyptian-Greek Medium: Glass-Stone-Gold

Necklace Of An Egyptian Scarab,Beads & Faience - FJ.1369 Origin: Egypt (Sinai) Circa: 1575 BC to 1100 BC Collection: Egyptian-Greek Medium: Glass-Stone-Gold   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1370)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1371)   « Less

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most ancient Egyptian beads were made of faience, a  More »

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1372)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1373)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1375)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1377)   « Less