A rare pair of antique cast bronze exterior door plates in P. & F. Corbin’s “Cushion” pattern, circa 1882, with swinging keyhole covers. When we cleaned  More »

A rare pair of antique cast bronze exterior door plates in P. & F. Corbin’s “Cushion” pattern, circa 1882, with swinging keyhole covers. When we cleaned the paint off these backplates, we were astonished to discover that these are either silver plated or nickel plated, very unusual for Eastlake hardware. These entrance doorplates feature a background made to look like a puffed cushion, accented with rows of tassels and a pattern of circles. The swinging keyhole covers are ornamented with the same design, featuring a tiny row of tassels across the top. These plates are in very good antique condition; the plating has worn off the lower corner of one plate, showing some bronze underneath. Each plate measures 8” by 2”. The price is for both plates. NDP51-RW   « Less

These are eight matching antique cast bronze pocket door plates with a rose design, circa 1895-1910. This is a very rare design of exceptional quality, featuring incredibly  More »

These are eight matching antique cast bronze pocket door plates with a rose design, circa 1895-1910. This is a very rare design of exceptional quality, featuring incredibly detailed casting. The top and bottom of each plate are ornamented with a matching design of roses with leaves, acanthus, anthemia, and volutes. This pocket door hardware is in excellent condition. Each plate measures 8” long, 2 5/8” wide, and ½” deep overall. THE PRICE LISTED IS FOR ONE PAIR OF PLATES; THERE ARE NOW TWO PAIRS AVAILABLE. Matching window lifts from the same residence are also available, item # NSL3; and a single pocket door plate with no keyhole is also available, item # NPDP13. NPDP12-RW   « Less

Antique Arts & Crafts door hardware sets, dating between the early 1900’s and 1920’s. The doorknobs feature a beautiful two-tone finish, with a highlighted  More »

Antique Arts & Crafts door hardware sets, dating between the early 1900’s and 1920’s. The doorknobs feature a beautiful two-tone finish, with a highlighted border and a darker center. The plates are arched at top and bottom, with a repetition of the same design found on the knob. This door hardware is in excellent condition with a great patina. The door knobs measure 2 ¼” in diameter and 2” deep; the plates are 2 ½” by 7 5/8”. Each hardware set consists of a pair of doorknobs with the connecting rod, screws, and two backplates (enough hardware for one door). THE PRICE LISTED IS FOR EACH SET; THERE IS NOW ONE SET AVAILABLE. These would work beautifully with either our modern latch set or antique mortise locks (NML2, NML3). NDKS40-RW   « Less

Five matching antique complete door hardware sets in cast iron, dating from the late 1800’s or early 1900’s, with doorknobs, doorplates, and mortise locks. The  More »

Five matching antique complete door hardware sets in cast iron, dating from the late 1800’s or early 1900’s, with doorknobs, doorplates, and mortise locks. The doorknobs feature a beautiful threefold design with a flower in the center, surrounded by volutes and leaves, with a bead-and-reel border. The back of each knob is ornamented with a variation of an egg-and-dart pattern, with leaves. The backplates feature an intricate design on the top and bottom, connected on the sides by a bead-and-reel border. These sets are in excellent condition. The door knobs are 2 ¼” in diameter and 2” deep; the backplates are 7 3/8” by 2 3/8”; and the plate on each mortise lock is 5 3/8” long and 7/8” wide. THE PRICE LISTED IS FOR EACH SET; THERE ARE NOW TWO SETS AVAILABLE. NDKS42-RW   « Less

These are five matching antique door hardware sets, in P. & F. Corbin’s “Lorraine” (or “Loraine”) pattern, with their matching backplates.  More »

These are five matching antique door hardware sets, in P. & F. Corbin’s “Lorraine” (or “Loraine”) pattern, with their matching backplates. Circa 1905, the back plates feature an anthemion at the top and the bottom, surrounded by volutes and intricate foliate detail. The door knobs feature a threefold looped border intertwined with leaves. These sets are in excellent condition. The plates are 2 ½” wide and 8 ½” tall, and the doorknobs are 2 ¼” wide and approx. 2 1/8” deep. THE PRICE LISTED IS FOR EACH SET; THERE ARE NOW TWO SETS AVAILABLE. Each set includes a pair of knobs, a pair of plates, and the connecting spindle with set screws. NDKS43   « Less

This is a charming complete set of antique cast bronze door hardware by F.C. Linde, featuring a five-flower design and including the door knobs, plates, and decorative  More »

This is a charming complete set of antique cast bronze door hardware by F.C. Linde, featuring a five-flower design and including the door knobs, plates, and decorative mortise lock. Dating from the late 1800’s, this door hardware feature a charming design, with a square crossed with a diagonal band of flowers, and flowers in the opposite corners. This motif is repeated on the doorknobs, backplates, and lock, along with zigzag detail and a shingle pattern. This set is in excellent functioning condition with a lovely patina. The doorknobs are 2 ¼” in diameter and 2” deep, and the backplates are 1 5/8” wide and 5 ½” long. The faceplate of the lock measures 6” by 15/16”. NDKS44-RW   « Less

Antique strikeplates (also known as “keepers” or “strikers”) to fit antique door hardware. This strike plate measures 3 ½” long overall and  More »

Antique strikeplates (also known as “keepers” or “strikers”) to fit antique door hardware. This strike plate measures 3 ½” long overall and has a 1/8” space between the latch and lock openings. Please see the photo for more detailed measurements. These door strikeplates are in their original aged finish and may have different colors of paint; refinishing is available for an additional charge of $5 per strikeplate. 24 AVAILABLE. NSTP3   « Less

Antique strikeplates (also known as “keepers” or “strikers”) to fit antique door hardware. This strike plate measures 3 7/16” long overall and  More »

Antique strikeplates (also known as “keepers” or “strikers”) to fit antique door hardware. This strike plate measures 3 7/16” long overall and has a ¼” space between the latch and lock openings. Please see the photo for more detailed measurements. These door strikeplates are in their original aged finish and may have different colors of paint; refinishing is available for an additional charge of $5 per strikeplate. TWO AVAILABLE. NSTP4   « Less

Antique strikeplates (also known as “keepers” or “strikers”) to fit antique door hardware. This strike plate measures 4 ¼” long overall and  More »

Antique strikeplates (also known as “keepers” or “strikers”) to fit antique door hardware. This strike plate measures 4 ¼” long overall and has a ¾” space between the latch and lock openings (this size often fits the wider spacing for Yale mortise locks). Please see the photo for more detailed measurements. These door strikeplates are in their original aged finish and may have different colors of paint; refinishing is available for an additional charge of $5 per strikeplate. THREE AVAILABLE. NSTP5   « Less

Four matching antique egg-and-dart door hardware sets in cast iron. This elegant Neoclassical door hardware dates between the late 1800’s and early 1900’s; both  More »

Four matching antique egg-and-dart door hardware sets in cast iron. This elegant Neoclassical door hardware dates between the late 1800’s and early 1900’s; both the door knobs and the plates feature a classic egg-and-dart border. These have been cleaned and lacquered to protect the finish. Each set includes a pair of doorknobs, backplates, a spindle, and set screws. The doorknobs are 2 ¼” in diameter and 1 7/8” deep; the plates are 2 3/16” by 7 ¼”. THE PRICE LISTED IS FOR ONE SET; THERE ARE TWO SETS AVAILABLE. NDKS46   « Less