Interesting wrought aluminum Arts & Crafts pair of sconces. Circa 1920 or so...very interesting offering having DEEP hammered pewter finish. We are especially impressed by  More »

Interesting wrought aluminum Arts & Crafts pair of sconces. Circa 1920 or so...very interesting offering having DEEP hammered pewter finish. We are especially impressed by the way that the shades match the backplates. It is hard to see in the pictures, but that large tan area below the embossed floral clear decor band, is crackled or hammered rough finish to match the finish of the backplates. Hard to see in the pictures but very impressive. Completely rewired to UL Standards and ready to go. Each sconce does have a switch which has been replaced by the same maker "Leviton" who made the same switch at the turn of the century. Measurements: 13" tall. The widest part of the sconce is the shade that is 6" wide. It will project into a room a mere 6 1/2". Price: $350.00 plus shipping.   « Less

There was a time back in the 1950's that these shades were reproduced for consumers decorating in the Victorian style. Not a lot of them survived but some of them were made  More »

There was a time back in the 1950's that these shades were reproduced for consumers decorating in the Victorian style. Not a lot of them survived but some of them were made pretty darn well. We believe that this is one of those shades which gives a nice ambiance. To make one of these is not so easy. First you had to have the art glass sheet. Then you had to cut each blank to size. Next was the "slumping" process where the flat cut out piece is laid up on a die that takes the shape you wish to create. It is put into a high temp oven and allowed to almost melt. The glass becomes soft and sags...or "slumps" over the die that has the shape you wish to create. After the slumping process, annealing takes place so it does not shatter when it cools and then some edge grinding and finally assembly. Not all the glass pieces survive. Measurements: 17 1/2" tall but could be lengthened by adding chain links, or...reduced to as little as 13" by removing all but one link. The shade has an 11" diameter and takes one 100 watt bulb. Price: $275.00 plus shipping.   « Less

Solid iron and brass fitters on this Art & Crafts close ceiling 3 light chandelier. Measuring a mere 8" tall with a diameter of about 16", this "star" fixture really does  More »

Solid iron and brass fitters on this Art & Crafts close ceiling 3 light chandelier. Measuring a mere 8" tall with a diameter of about 16", this "star" fixture really does impart a motif and ambiance. Guessing about 1930-40 era. Mounts to the ceiling very simply with the center finial. To make it better, please note that this fixture has been completely rewired with new sockets, and new wire, and is ready to hang. A full mounting crossbar set will be sent with this chandelier. Each socket is capable of a 100 watt incandescent bulb. Shades and full installation kit are included. One only available of this restored light. Measurements: Overall diameter 16", including shades. 8" tall. Price: $295.00 plus shipping.   « Less

A PAIR of matching Art Deco period two light close ceiling chandeliers. Excellent for a lower ceiling where substantial light is desired. They could, if desired, be mounted  More »

A PAIR of matching Art Deco period two light close ceiling chandeliers. Excellent for a lower ceiling where substantial light is desired. They could, if desired, be mounted with a pull chain for off/on at the fixture. Or, it can be used with a dimmer wall switch. While they were produced just slightly before the true Art Deco era, they would have nicely graced a home from 1920 to 1940 with authentic ease. The frames have a nice pewter finish. Circa 1920, these fixtures were originally sold both as a close ceiling fixture and with a stem for a longer drop. These chandeliers have been totally rewired to UL code with new sockets and wire and are ready to grace a lovely home. Each socket is fully capable of 100 watt incandescent bulb each. Measurements: 14 1/2" wide with a drop of only 7 1/2 ". It fastens directly to a UL approved electrical box by the center finial. All mounting supplies will be furnished. Sold as a pair complete with the 4 glass shades as shown. Price: $522.50 for the pair, plus $35.00 for ground shipping within the contiguous 48 states. Residents of Alaska/Hawaii and International Customers, please contact us at 360-379-9030 for a shipping quote.   « Less

Very interesting French turn-of-the-century chandelier with "white" mica paneling over the reticulated section. Made from solid brass, this chandelier has a interesting mix  More »

Very interesting French turn-of-the-century chandelier with "white" mica paneling over the reticulated section. Made from solid brass, this chandelier has a interesting mix of other components. The crystal dome at the bottom just seems to make this light come alive. Then there is a covering of "white mica" over the pierced rococo style design center. A quality design. Taking it one step further, when we re-wired this fixture, we decided to give it the added dimension of Induction Lighting (lasts 60,000 to 100,000 hours). One of the pictures shows the inside of the fixture with an induction circle lighting the entire light. The induction bulb is using only 40 watts, but is outputting the equivalent of 264 watts of incandescent light. We love this adaptation but...perhaps you won't. Even though we carry replacement bulbs, alternatively, you COULD replace it with any mogul based incandescent bulb if you so wished. We just think it is neat that this old light can have a "green" adaptation too. And since the bulb is not seen directly, it would be a bit of a mystery to your friends and a definite point of "green" discussion and knowledge. Overall Light Measurements: Height: 28" Spread: 22" If you wish a longer light, or just slightly shorter, we can do this for you by adding or subtracting chain. Price: $1,750.00 plus shipping.   « Less

Circa 1930's, these sconces are finished in an oil rubbed bronze (near black) finish with brass highlights. They have an interesting opal shade with a clear waffle glass  More »

Circa 1930's, these sconces are finished in an oil rubbed bronze (near black) finish with brass highlights. They have an interesting opal shade with a clear waffle glass panel for that extra bit of light. An interesting thing about that waffle panel is that the shade does spin in it's fitter so the waffle panel can be turned sideways to focus more light on a face if the sconces were put to each side of a mirror. For that matter, the waffle can also be turned 180º to face the wall if it ever got to be annoying for some reason. Electrical: These sconces have been totally re-wired in our UL shop. Normal bakelite sockets for everyday medium base bulbs. The backplate has a rotary switch for on and off. The sconce mounts with one normal sconce mounting all-thread to a normal electrical box from within the case. All mounting hardware will be supplied. Pair of American made late 30's sconces. Measurements: 7 1/2" tall. The backplate's round area has a maximum width of 3 3/4". Projects into a room from the wall 5". For the complete, UL re-wired pair of sconces, $295.00 plus careful shipping.   « Less

We only have four of these sconces. We believe they are French due to the old sockets we removed and probably from the 1950's or so. The shell motif is so nice for that  More »

We only have four of these sconces. We believe they are French due to the old sockets we removed and probably from the 1950's or so. The shell motif is so nice for that decorative effect. Electrical: These sconces have been totally re-wired, to American UL standards in our UL shop. Normal bakelite sockets for everyday medium base bulbs were installed. The sconce mounts with one normal sconce mounting all-thread to a normal electrical box from within the case. All mounting hardware will be supplied. Measurements: 8 1/2" tall. The shade has a maximum diameter of 8". Projects into a room from the wall 4 1/2". PER Pair....$485.00 plus careful shipping. At the time of posting, we had four matching sconces (2 pair) but un-known at this time.   « Less

An elegant antique Art Nouveau pan light fixture with its original glass shades, dating from the early 1900’s. This brass chandelier begins with a loop finial with a  More »

An elegant antique Art Nouveau pan light fixture with its original glass shades, dating from the early 1900’s. This brass chandelier begins with a loop finial with a looped Art Nouveau design; the section connecting to the chandelier body features a matching pattern. The fixture has a brass body with ornamented arms. Each arm holds a glass shade with a graceful shape and a scalloped lower edge. The underside of the chandelier features a looped, ribbon-like design with a tassel finial at the center. This light fixture is in excellent condition and the glass is also in excellent condition with no cracks or breaks. The chandelier has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 19-1/2” wide and 16-1/2” tall, and the fixture is 37” long overall. NC1297-RW   « Less

Here are 2 Genuine-Authentic- A mach set of very elegant, and beautifully detailed, Hand Painted-Porcelain (Vintage1937-1939) Table Lamps. By Azzolin Brothers, MADE IN ITALY,  More »

Here are 2 Genuine-Authentic- A mach set of very elegant, and beautifully detailed, Hand Painted-Porcelain (Vintage1937-1939) Table Lamps. By Azzolin Brothers, MADE IN ITALY, Capo Di Monte Lamps These Ornate & Collectible Art Pieces are in "Mint-Museum Condition". Circa is late 1930's ON E-BAY COMPARABLE CAPO DE MONTE HAND PAINTED VINTAGE LAMPS ARE $200+.....AT THE FIND THEY ARE $200+ FOR EACH... *YOURS HERE-BOTH FOR $87!-QUESTIONS 973-232-6514* ITEMS ARE PART OF AN ESTATE LIQUIDATION THAT MUST BE SETTLED Beautiful in design, these 2 outstanding beautiful lamp will accent any room. Capo di Monte Hand Painted Porcelain. The hand-painted porcelain is brightly colored and infuses a sense of tranquility into any room. Shaped in a unique manner, these table lamps have a tapering, ivory shade. Ideal for bedrooms, foyers, entryways, end tables and writing desks this hand-painted porcelain lamp will complement any room decor. They will stand the test of time and are functional works of art that you're sure to treasure. The colors are blend of pinks, purples. blues greens and ivory. the hand painted design has raised format. LOCATION: SPRINGFIELD, NJ 07081   « Less

Fantastic antique five light Tudor chandelier, dating from the early 1920s and salvaged out of an Indiana home. This cast iron light fixture features a hammered texture  More »

Fantastic antique five light Tudor chandelier, dating from the early 1920s and salvaged out of an Indiana home. This cast iron light fixture features a hammered texture throughout, beginning in a simple canopy and moving down in chain to an arched loop finial. The upper body is composed of a cut-out decorative iron panel with swirl and button details. It tapers down to a lower bowl-like body made of a fleur-de-lis lattice pattern. Five hammered candle cups extend out to support the lights, and the fixture finishes in a small spear finial. This light fixture is in excellent condition and is signed Puritan on the back, as pictured. It has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 17-1/4" wide, 14-1/2" tall, and 32" long overall.   « Less