Lovely antique three-light chandelier with prisms and original polychrome finish, circa 1920. This chandelier begins with an intricate canopy with scrolling foliage and  More »

Lovely antique three-light chandelier with prisms and original polychrome finish, circa 1920. This chandelier begins with an intricate canopy with scrolling foliage and beaded border detail. It extends down to a looped finial and the body is composed of three beautifully curved bands with acanthus leaf and floral details. In the center of the three bands is an inverted dome, on top of which sits three bobeches with a geometric leaf pattern. At the base of the dome, icicle prisms hang from the bottom of the three bands, which then taper off into a finial with a teardrop prism. Original red and green polychrome finish is featured throughout the fixture, on all foliage, floral and leaf detailing. The chandelier is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The fixture measures 7-3/4" wide, 23-1/2" tall, and the fixture is approximately 35" tall overall. NC1090-RW   « Less

Wonderful antique five-light iron Tudor chandelier, dating from the 1920’s. The chandelier begins with a loop finial with rope details; below, five wrought iron bands,  More »

Wonderful antique five-light iron Tudor chandelier, dating from the 1920’s. The chandelier begins with a loop finial with rope details; below, five wrought iron bands, connected at the top and bottom with floret buttons, form the chandelier body and feature scrolling arms that extend down and out. Each arm ends in a curl with a foliate bobeche. The body tapers down, finishing in a cluster of foliage. This light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 19-1/2” wide and 21-3/4” tall, and the fixture is 38-1/4” long overall. NC1229-RW   « Less

A graceful antique five light chandelier in its original silver plate, dating from the 1920’s. This Colonial Revival chandelier begins with a loop finial atop a  More »

A graceful antique five light chandelier in its original silver plate, dating from the 1920’s. This Colonial Revival chandelier begins with a loop finial atop a silver plated baluster that forms the chandelier body, ending in an acorn finial at the bottom. Five sleek arms extend from the chandelier body, each crowned with a baluster finial at the top and a silver plated bobeche at the bottom. This light fixture is in excellent condition with a beautifully aged finish; it has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 18-3/4” wide and 16” tall, and the fixture is 31-1/4” long overall. NC1230-RW   « Less

A wonderful pair of antique Arts & Crafts wall-mount lanterns with their original glass, c. 1905, salvaged out of Springfield, IL. Each sconce features a round, hammered  More »

A wonderful pair of antique Arts & Crafts wall-mount lanterns with their original glass, c. 1905, salvaged out of Springfield, IL. Each sconce features a round, hammered backplate with a flared edge. A smooth arm extends from the center of the backplate, ending in a hook. A lantern, crowned with a trefoil finial, hangs from the hook. The lanterns feature hammered, sloped roofs and banding details with hand-riveted tabs across the glass cylinders. These wall lamps are in excellent condition; they have been professionally rewired and come with all the necessary attachments for modern installation. The glass has just the expected fleabites and a couple of small chips around the rims as shown. The sconces measure 14-1/2” tall, 6-1/4” wide, and project 13” from the wall (all measurements approximate). A matching figural chandelier with monks’ heads is also available, item # NC1224-RW. NSP697-RW   « Less

Here is a 1930s chandelier designed and made by R. Williamson & Co., and marketed in the 1930s by Beardslee, who had bought the Williamson company for their excellent  More »

Here is a 1930s chandelier designed and made by R. Williamson & Co., and marketed in the 1930s by Beardslee, who had bought the Williamson company for their excellent designs. Every lovely decorated metal panel of this great light is impressed with the RW&Co logo. This particular RW mark is so early, we believe it was made before the purchase by Beardslee, since later marks spelled out the entire name, instead of using the company's initials mark. What a gorgeous fixture and in such wonderful condition. All parts are present, nothing missing. Shades are in remarkable condition and the fixture has been totally rewired in our UL shop. At present, this light has a drop of 27 1/2 inches. It has a diameter of about 17 1/2 inches. The canopy diameter is 5 5/8 inches. This light has its original deco polychrome color finish which has been very beautifully maintained. The rewiring was also done with the utmost care. The sockets are new by Leviton....and are the identical type that Williamson used in the 1930s. The goal is to maintain the originality of the fixture as much as possible. And...it does...look great. Each socket is rated for 100 watts so achieving 500 watts of light is very easy to do. We will also be supplying the bracket (crossbar) for this light so literally, you can hang this light and have it working minutes after receiving it. Really an outstanding light. A great value for an outstanding, scarce, rewired, and signed Art Deco Chandelier. Price $1,250 plus shipping.   « Less

For that really special application and sure to get attention. A turn of the century (circa 1900s) ball chandelier with lots of lovely solid brass decor. We would assume  More »

For that really special application and sure to get attention. A turn of the century (circa 1900s) ball chandelier with lots of lovely solid brass decor. We would assume that this is a wonderful entry piece because it has just so much going on. But, of course, it could be used in any room where a definite statement wants to be made. Original curved art glass in two distinct finishes and colors make up the entire ball. Simply a summation of the end of the Victorian era. Replacing the light bulbs is done by opening the ball for access to the sockets. There are SIX sockets inside with 3 sockets lighting the top half of the ball and 3 sockets lighting the bottom half of the ball. For photography, we used low power bulbs so the camera would not blank out the detail by reacting to a high powered light source. This light has been totally re-wired to UL standards and is ready to hang. Measurements: 55 inches tall but could be shortened by removing some stem elements. The maximum diameter is 14". All mounting hardware will be included. $875.00 for this gorgeous chandelier... plus shipping   « Less

We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed  More »

We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed reddish bronze finish and the detail for these old castings, meant for outside, is pretty good with some age considerations. They do vary a bit as all old castings will. We have totally rewired these and also added a water protection fitter which helps channel rainwater away. We changed the poorly designed mounting options and now they mount with 3 lag bolts that have decorative theft deterrent caps. You can see the 3 caps that go over the lag bolts, on the back plate. There are three of them. These sconces are big and heavy and get bigger and heavier with the shades that are chosen to go with them. Measurements: The backplate is 21" tall by 9" max wide before shades are added. The light protrudes 15" before shades are added. ANT-262-157 has a final height of 27" tall by 10 1/2" wide and a 17" projection. Price: $1,350.00 plus shipping. This does include the shade. At this time, we have two of these fixtures only. When they are gone...they are gone.   « Less

We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed  More »

We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed reddish bronze finish and the detail for these old castings, meant for outside, is pretty good with some age considerations. They do vary a bit as all old castings will. We have totally rewired these and also added a water protection fitter which helps channel rainwater away. We changed the poorly designed mounting options and now they mount with 3 lag bolts that have decorative theft deterrent caps. You can see the 3 caps that go over the lag bolts, on the back plate. There are three of them. These sconces are big and heavy and get bigger and heavier with the shades that are chosen to go with them. Measurements: The backplate is 21" tall by 9" max wide before shades are added. The light protrudes 15" before shades are added. ANT-262-50 has a 12" diameter ball shade. Its height now becomes 25" with a projection of 17 1/2" and the width of the shade which is 12". Price: $1,350.00 plus shipping. This does include the shade. At this time, we have two of these fixtures only. When they are gone...they are gone.   « Less

We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed  More »

We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed reddish bronze finish and the detail for these old castings, meant for outside, is pretty good with some age considerations. They do vary a bit as all old castings will. We have totally rewired these and also added a water protection fitter which helps channel rainwater away. We changed the poorly designed mounting options and now they mount with 3 lag bolts that have decorative theft deterrent caps. You can see the 3 caps that go over the lag bolts, on the back plate. There are three of them. These sconces are big and heavy and get bigger and heavier with the shades that are chosen to go with them. Measurements: The backplate is 21" tall by 9" max wide before shades are added. The light protrudes 15" before shades are added. ANT-262-FLM is simply for folks who desire an outrageous flame shaded architectural light and have funds budgeted for it. This shade is pretty expensive and the fitter has to be changed from a 6" fitter to an 8" fitter. But the results are rather superb. The shade, by itself, is 17" tall with a diameter of about 10". Using this shade, the resulting fixture becomes 30" tall by about 10" wide and projects 16". We can coat the shade for an amber appearance if desired. Price: $1,850.00 plus shipping. This does include the fantastic giant flame shade either frosted or amber treated. At this time, we have two of these fixtures only. When they are gone...they are gone.   « Less

Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect. Circa 1900, they were constructed as  More »

Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect. Circa 1900, they were constructed as GAS and Electric sconces, like the interior chandeliers made at this time when electrical supplies were spotty at best. Looking on top of the sconce, you can see the gas valve with teeter lever valve which could be opened and closed using a long gas lighter's pole. The overall height of this great sconce with the chain long is 38", while it's width is 9 1/4". It projects outwards 20". On the short chain fixture, the chain is about 5 inches shorter. To get an idea of just how large these great lights are, please note the 12" ruler that is included in the pictures. The original ball shade has a 6" fitter and is much thicker than the re-creations that are made today. It is just amazing that it has survived about 100 years. This could quite easily accept a 250 watt light bulb or the new induction type bulbs. We have removed all the rust and replaced perished screws. These fixtures have been re-wired to UL standards and are ready to mount. We are offering the ten fixtures, taken from an estate, finished in either an aunatural Iron and Brass ...or...finishing them in a Semi-Gloss black. When these fixtures are gone, as they say...they are gone. Only ten were pulled from a lovely estate courtyard. Measurements: Backplate measures: Height: 20 11/16" x Width: 6 3/4". OA Height: 38" x W 9 1/4". Projects 20". Fitter size 6". Price $935.00 plus shipping charges. Yes, it comes complete with the round globe shade.   « Less