With the look of a 1900's chandelier, we offer this outstanding "silverized" chandelier. The style of this chandelier is more like Edwardian than Victorian but it keeps the  More »

With the look of a 1900's chandelier, we offer this outstanding "silverized" chandelier. The style of this chandelier is more like Edwardian than Victorian but it keeps the "gasolier" look to it. We added our fine cut glass shades since they most resemble the single broken one we received with the light. I can see so many different elements in the design, it seems that it would blend with many decorative schemes: i.e Arts and Crafts or Edwardian and even Art Deco. While it does appear to mimic "gasolier" style, it was never gas. While the figures seem to suggest deco, it could also be bountiful harvest. All in all....it simply is a fascinating antique fixture, definitely 1900-1930. Very imposing and definitely a subject for around the table conversation if it were to be placed over a dining table. Measures: 49" tall with a width of 32". It could be shortened as those three support rods could be trimmed. But, if over a dining table...we would encourage leaving it at its present height. And we have re-wired this light to UL standards with new sockets and wiring. Ready to hang. Price: $1,750 with shades shown, plus shipping.   « Less

What an interesting pair of sconces these are. While they are simply lovely, they are also a bit of a puzzle. They could have been custom made since the shades are Circa  More »

What an interesting pair of sconces these are. While they are simply lovely, they are also a bit of a puzzle. They could have been custom made since the shades are Circa 1920-30 crackle glass, but the steel and iron fixtures seem more recent. The shades are hand blown "art" form and are slightly different shapes and sizes. Each one fits its own sconce. This is another reason we believe that these were hand made, for a particular place for a particular client. Regardless of how they came into being.....the decorative effect is stunning. Ready to go...nothing needs to be done except add the light bulb. These sconces have been completely rewired and are supplied with all the mounting hardware. Each sconce does have its own switch which is identical to the ones used in 1910. It's hard to tell it was even replaced. Measurements: The Overall sconce height is 15 ½". The back plate measures 3" wide x 11" tall. The widest width is the shades which...depending on where you measure them, will vary. But a maximum of 7 ½" is about the widest. The project into the room from the wall about 8 ½". Price: $325.00 for the pair, plus shipping.   « Less

A striking antique one-light Tudor flush mount fixture, dating from the 1920’s and salvaged from Detroit, Michigan. The fixture features a hammered, cast iron body  More »

A striking antique one-light Tudor flush mount fixture, dating from the 1920’s and salvaged from Detroit, Michigan. The fixture features a hammered, cast iron body with stylized foliate straps radiating from the center. This light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. It measures 8” in diameter and 5-1/2” long without the bulb. NC1218-RW   « Less

A fabulous pair of antique double-arm sconces in cast iron, dating from the 1920’s, made by Markel Electric Products. These were salvaged from a house in Fort Madison,  More »

A fabulous pair of antique double-arm sconces in cast iron, dating from the 1920’s, made by Markel Electric Products. These were salvaged from a house in Fort Madison, Iowa. The cast iron backplate features flowers and leaves at the top and bottom, with a rope oval in the center. Two wrought iron sconce arms, fastened with flower buttons, support double-layer foliate bobeches. These wall lamps are in excellent condition; they have been professionally rewired and come with all the necessary attachments for modern installation. We kept the original nonfunctioning turn switches for nostalgia’s sake; however, we will gladly replace them with new ones if desired. The sconces measure 12” tall, 9-1/2” wide, and project 6” from the wall. NSP696-RW   « Less

Fabulous antique 1930's two light flush mount slip shade with original polychrome finish. The fixture features a wonderful foliate and poppy flower design, with beautiful  More »

Fabulous antique 1930's two light flush mount slip shade with original polychrome finish. The fixture features a wonderful foliate and poppy flower design, with beautiful iridescent batwing shades. Art deco motifs are found throughout the fixture, accented by gold, green, and yellow polychrome finish. The light fixture is in excellent condition with no cracks or breaks the to the slipper shades, just the expected fleabites around the rims. The flush mount has been professionally rewired and comes with all the necessary attachments for modern installation. The fixture measures 16" wide and 7-1/2" tall. NC1219-RW   « Less

Dramatic antique English Tudor five-light chandelier, salvaged out of Asheville, SC. This bronze fixture begins with a hammered, decorative canopy, moving down in chain to a  More »

Dramatic antique English Tudor five-light chandelier, salvaged out of Asheville, SC. This bronze fixture begins with a hammered, decorative canopy, moving down in chain to a bell-shaped loop finial. The chandelier body is made of a vertical beam surrounded by panels of scrolling fretwork. A horizontal circular band of the same fretwork features a central shield with original polychrome finish. Chandelier arms extend up and out from the body, supporting crenellated bobeches. The bottom of the chandelier tapers down in decorative detail to a scrolling finial. The light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 19-1/2" wide and 21" tall, and the fixture is 35" long overall. NC1220-RW   « Less

Dramatic antique English Tudor five-light chandelier, salvaged out of Asheville, SC. This bronze fixture begins with a hammered, decorative canopy, moving down in chain to a  More »

Dramatic antique English Tudor five-light chandelier, salvaged out of Asheville, SC. This bronze fixture begins with a hammered, decorative canopy, moving down in chain to a bell-shaped loop finial. The chandelier body is made of a vertical beam surrounded by panels of scrolling fretwork. A horizontal circular band of the same fretwork features a central shield with original polychrome finish. Chandelier arms extend up and out from the body, supporting crenellated bobeches. The bottom of the chandelier tapers down in decorative detail to a scrolling finial. The light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 19-1/2" wide and 21" tall, and the fixture is 35" long overall. NC1220-RW   « Less

Fantastic antique Spanish revival five-light chandelier, c. 1920s, salvaged out of San Francisco, CA. This brass light fixture features a wonderful hammered texture  More »

Fantastic antique Spanish revival five-light chandelier, c. 1920s, salvaged out of San Francisco, CA. This brass light fixture features a wonderful hammered texture throughout. It begins with an understated canopy and chain, coming down to a loop finial and flower cup with five attached chains. The chains extend down to meet a circular banded body below. Five small chandelier arms extend out to support flower cup bobeches and undulating candle cups. The light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 22-1/2" wide and 17" tall, and the fixture is 29" long overall. NC1221-RW   « Less

Two matching antique Neoclassical five-light chandeliers, dating from the 1920s. Each silver over brass pan light begins with an understated canopy and chain. Below, the  More »

Two matching antique Neoclassical five-light chandeliers, dating from the 1920s. Each silver over brass pan light begins with an understated canopy and chain. Below, the chandelier body is crowned with a foliate loop finial. The chandelier body is a broad disk, with the underside of the five chandelier arms featuring intricate floral, leaf, and scrolling details. They extend out to support simple bobeches, while glass pendants hang from each arm. The chandelier's body tapers down to a final glass pendant finial. This light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 19-3/4” wide and 16” tall, and the fixture is 30” long overall. PRICE LISTED IS FOR EACH LIGHT FIXTURE; THERE IS NOW ONLY ONE AVAILABLE.   « Less

Charming antique Arts & Crafts flush mount lantern, dating from the early 1900s. The flush mount light fixture begins with a simple iron fitter that also serves as the  More »

Charming antique Arts & Crafts flush mount lantern, dating from the early 1900s. The flush mount light fixture begins with a simple iron fitter that also serves as the lantern roof. The body is composed of four panels of original glass, accented at the corners with florets. A curved, V-shaped iron band, fastened at the ends with florets, crosses each panel near the top of the lantern. This light fixture is in excellent condition with no cracks or breaks to the glass, just the expected flea bites around the rim. There are a few chips to the paint, as pictured. The lantern has been professionally rewired and comes with all the necessary attachments for modern installation. The fixture measures 6-1/8" wide and 7-1/4" tall. NC1223-RW   « Less