|
Antique Hardware & Supplies
|
|
 |
|
|
|
Price :
$2.49
STEEL J CHANNEL MIRROR CLIPS Nickel Plated Steel Channel MIRROR CLIP with Felt Liner Overall: 1-3/4"high x 1/2"wide x 5/8"projection with 5/16" Lip, Includes screws.
STEEL J CHANNEL MIRROR CLIPS Nickel Plated Steel Channel MIRROR CLIP with Felt Liner Overall: 1-3/4"high x 1/2"wide x 5/8"projection with 5/16" Lip, Includes screws. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$9.97
ANTIQUED CAST BRASS PLATFORM CASTER Wheel - 1/2"wide x 15/16"diameter, Serrated Stem - 1"long x 1/4"diameter Platform - 1-1/16"diameter, Overall Height - 2-1/2" Raises More »
ANTIQUED CAST BRASS PLATFORM CASTER Wheel - 1/2"wide x 15/16"diameter, Serrated Stem - 1"long x 1/4"diameter Platform - 1-1/16"diameter, Overall Height - 2-1/2" Raises Furniture 1-3/8". No socket necessary. Attaches with three screws (provided) through bottom of platform. May be used to replace broken Cup Casters. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$5.29
VICTORIAN STYLE BAIL PULL STAMPED BRASS DRAWER HARDWARE Back plate: 2-3/16"h x 4-3/4"w, Centers: 3".
VICTORIAN STYLE BAIL PULL STAMPED BRASS DRAWER HARDWARE Back plate: 2-3/16"h x 4-3/4"w, Centers: 3". « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$20.99
BRASS CURVED CRANK for WESTERN ELECTRIC made in USA ALSO AVAILABLE IN BLACK BL-9924 CONTACT SELLER FOR DETAILS
BRASS CURVED CRANK for WESTERN ELECTRIC made in USA ALSO AVAILABLE IN BLACK BL-9924 CONTACT SELLER FOR DETAILS « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$2.99
SMALL CUPBOARD TURN / CABINET LATCH BRASS PLATED STEEL(ALSO AVAILABLE IN NICKEL PLATED STEEL) Latch Base -1 7/8"h x 1/1/4"w, Latch projects 1-1//8" when mounted Catch Base 1 More »
SMALL CUPBOARD TURN / CABINET LATCH BRASS PLATED STEEL(ALSO AVAILABLE IN NICKEL PLATED STEEL) Latch Base -1 7/8"h x 1/1/4"w, Latch projects 1-1//8" when mounted Catch Base 1 7/8"h x 1/2"w, Catches project 1/2" when mounted Includes Mounting screws. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$9.97
BIRCH REPLACEMENT SEAT BOARD-CIRCLE PATTERN Untrimmed Size - 19 7/8" Square Approx. Birch seat boards are sold untrimmed due to the different shapes and various sizes of More »
BIRCH REPLACEMENT SEAT BOARD-CIRCLE PATTERN Untrimmed Size - 19 7/8" Square Approx. Birch seat boards are sold untrimmed due to the different shapes and various sizes of chairs to be fitted. They can be cut with a band saw, scroll saw or saber saw. We also carry Decorative Nails. To determine the number of nails necessary, plan on spacing nails from 3/4" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$8.97
The suggested minimum trim size for this seat is 1 inch greater than the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the More »
The suggested minimum trim size for this seat is 1 inch greater than the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the pattern is as much as 3/16" off center. These Chair Seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recomment using a scrap piece of seatboard to test the results.We also carry Decorative Nails. To determine the number of nails necessary, plan on using one nail every 3/4" to 1 1/2". For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$7.79
PAW FOOT TABLE LEG END CAPS Stamped Steel - Antique English Finish with Pins. Inside Heel Width 1-1/2", Inside Heel Height 1 7/16", Overall Length 2 3/8", Toe Width 2 1/4".
PAW FOOT TABLE LEG END CAPS Stamped Steel - Antique English Finish with Pins. Inside Heel Width 1-1/2", Inside Heel Height 1 7/16", Overall Length 2 3/8", Toe Width 2 1/4". « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$5.49
ZINC PLATED STEEL KEYHOLE FASTENER Zinc Plated Steel Single KEYHOLE FASTENER, Package of 12 Overall: 1-5/8"high x 9/16"wide Excellent for mounting shelves, Includes screws.
ZINC PLATED STEEL KEYHOLE FASTENER Zinc Plated Steel Single KEYHOLE FASTENER, Package of 12 Overall: 1-5/8"high x 9/16"wide Excellent for mounting shelves, Includes screws. « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
Price :
$4.89
CHIPPENDALE STYLE DRAWER PULL POLISHED STAMPED BRASS Backplate - 2-3/4" High x 3-5/8" Wide, Centers - 3" Includes Mounting Fasteners Matches B-0691 Drawer pull (2-1/2" More »
CHIPPENDALE STYLE DRAWER PULL POLISHED STAMPED BRASS Backplate - 2-3/4" High x 3-5/8" Wide, Centers - 3" Includes Mounting Fasteners Matches B-0691 Drawer pull (2-1/2" Centers) « Less
|
|
Reproduction Hardware
|
|
|
|
|
| Vendor Details |
Close |
| Contact Info : |
| 4 Mile Antiques |
| 3796 Mahoning Avenue |
| Ohio-44515 |
| USA |
| Email : ted@4mileantiques.com |
| Phone : 330.270.5843 ‎ |
|
|
|
|
|
|
|
|
|
