This is an unusual pair of antique figural cast bronze door backplates, dating from the late 1800’s and featuring a bird or mythological creature. These magnificent  More »

This is an unusual pair of antique figural cast bronze door backplates, dating from the late 1800’s and featuring a bird or mythological creature. These magnificent doorplates are ornamented with stylized foliate detail, crowned with the bird’s head at the top of the plate. These door plates are in excellent condition; each measures 7 ¼” by 2”. The price listed is for the pair. NDP34-RW   « Less

These are three antique door hardware sets, in the elegant “Monaco” pattern by Yale and Towne, including the door knobs, matching signed back plates, and antique  More »

These are three antique door hardware sets, in the elegant “Monaco” pattern by Yale and Towne, including the door knobs, matching signed back plates, and antique mortise locks. Found in the Y&T 1910 catalog, these cast iron doorknob sets feature a stunning design of flowers, acanthus leaves, and palmettes, with a delicate beaded border. They are in excellent condition. The doorknobs and escutcheon plates are accompanied by antique mortise locks. Each backplate is 8 ½” by 2 ½”; the knobs are 2 ¼” in diameter and 2 ¼” deep. THE PRICE LISTED IS FOR EACH SET; THERE ARE TWO SETS AVAILABLE. NDKS31-RW   « Less

This is a hard-to-find complete working thumb-latch set for an exterior door, dating from the 1920’s or 1930’s. Made of brass, this door hardware set comes  More »

This is a hard-to-find complete working thumb-latch set for an exterior door, dating from the 1920’s or 1930’s. Made of brass, this door hardware set comes with its split-system lock, four keys, the handle with thumb latch, doorknob, striker, two-part spindle, and backplate. The cast brass handle features an elegant, curved design that is very comfortable in the hand; it has square beveled mounting plates and a matching square escutcheon for the lock cylinder. The inside of the set features a simple, beveled brass plate with a thumb-turn and a smooth brass knob. This entry door hardware has a lovely patina and works beautifully; it is in very good antique condition with some minor dings and scratches to the knob and the handle. The handle measures 8 ½” by 2 5/8”, the interior doorplate is 7” by 2 ¼”, and the doorknob is 2 ¼” in diameter and 2” deep. If desired, we can replace the brass knob with a glass one for a small additional cost. NTH3-RW   « Less

This is a beautiful pair of antique cast iron 3.5” x 3.5” hinges, dating from the 19th Century, with steeple finials. The three-knuckle hinges feature an elegant  More »

This is a beautiful pair of antique cast iron 3.5” x 3.5” hinges, dating from the 19th Century, with steeple finials. The three-knuckle hinges feature an elegant leaf and vine design on a textured background, with an abstract design along the knuckles of the hinge on both the front and back. These Eastlake hinges are in excellent condition. Each hinge measures 3 ½” wide overall, 3 ½” tall, and 5 ¾” from finial to finial. NHP19   « Less

This is a splendid antique cast bronze double pocket door set in a variation of Lockwood’s “Broken Leaf” pattern, patent dated August 10, 1886, and  More »

This is a splendid antique cast bronze double pocket door set in a variation of Lockwood’s “Broken Leaf” pattern, patent dated August 10, 1886, and designed for a pair of double doors. The set features four cast bronze plates, ornamented with an urn of flowers at the bottom, with floral and geometric designs throughout. One pair of plates has a keyhole; the other pair features a floret in its place. The locks feature bronze faceplates the asymmetrical “Broken Leaf” design, featuring an urn on one side and a tri-lobal leaf on the other, with vine and leaf detail above. The locks function beautifully. The doorplates are in excellent condition; the locks are in very good antique condition with some minor wear to the catch on one of the locks (pictured). The plates measure 2 1/8” wide, 5 1/8” tall, and 5/8” deep overall; the locks are 3 7/8” deep overall, the faceplate is 6 ¾” tall and 1 ¼” wide, and the box portion of each lock is 4 ½” tall. NPDP9-RW   « Less

These are three matching complete sets of antique cast bronze door hardware by F.C. Linde, featuring a five-flower design and including the door knobs, plates, and mortise  More »

These are three matching complete sets of antique cast bronze door hardware by F.C. Linde, featuring a five-flower design and including the door knobs, plates, and mortise locks. Dating from the late 1800’s, these sets feature a charming design, with a square crossed with a diagonal band of flowers, and flowers in the opposite corners. This motif is repeated on the knobs, plates, and locks, along with zigzag detail and a shingle pattern. One lock is signed “F.C.L. & Co., Creskill, NJ.” These sets are in very good antique condition; the knobs have some minor wear and one knob has an enlarged set screw hole (pictured) which is barely noticeable and has no effect on the functionality of the set. The doorknobs are 2 ¼” in diameter and 2 ¼” deep, and the backplates are 1 ¾” wide and 5 ½” long. The faceplate of each lock measures 5 ¼” by 15/16”. THE PRICE LISTED IS FOR EACH SET; THERE ARE TWO SETS AVAILABLE. NDKS34-RW   « Less

These are two matching antique bronze exterior door hardware sets, in Yale & Towne’s “Meridian” design, circa 1910. This hardware features an elegant  More »

These are two matching antique bronze exterior door hardware sets, in Yale & Towne’s “Meridian” design, circa 1910. This hardware features an elegant Neoclassical scroll design with unusual oval doorknobs; the plates and keyholes are crowned with palmettes. Each set comes with the original split-system lock, large exterior backplate with a double keyhole, rosette and keyhole escutcheon, and pair of oval doorknobs with the connecting rod. These entry door sets are in excellent condition with a lovely patina. The backplates measure 11” by 3”, the roses are 2 1/8” in diameter, and the keyhole covers are 3 1/8” by 1 3/8”. The doorknobs are 2 ¾” tall, 1 5/8” wide, and 2” deep. E PRICE LISTED IS FOR EACH SET; NOW ONLY ONE AVAILABLE. NDKS30-RW   « Less

These are four matching antique door hardware sets by Russell & Erwin, with bronze doorknobs and iron door plates with their original bronze wash. The locks are signed and  More »

These are four matching antique door hardware sets by Russell & Erwin, with bronze doorknobs and iron door plates with their original bronze wash. The locks are signed and patent dated 1889. The backplates and locks feature R&E’s elegant “Villa” design, with crisp detail and a lovely finish. The bronze door knobs, original to the sets as found in a 19th Century home, are in a different pattern that coordinates beautifully with the doorplates and knobs. The knobs feature a flower in the center, surrounded by an overlapping fan pattern. These sets are in excellent condition and function beautifully. The knobs are 2 ¼” in diameter and 2” deep; the backplates are 5 ½” by 1 3/8”; and the plate on each mortise lock is 5 3/8” long and 15/16” wide. THE PRICE LISTED IS FOR EACH SET; THERE ARE FOUR SETS AVAILABLE. Each set consists of a pair of knobs with the set screws and connecting rod, two plates, and one lock. NDKS33-RW   « Less

This is a stately antique door hardware set, made by Sargent in the “Haven” design featured in their 1894 catalog. The set includes the doorknobs with connecting  More »

This is a stately antique door hardware set, made by Sargent in the “Haven” design featured in their 1894 catalog. The set includes the doorknobs with connecting spindle, a pair of plates, and an antique mortise lock. The door knobs feature an elegant three-fold design of volutes and leaves surrounding a raised center; the plates are crowned with a crest surrounded by foliate detail and volutes. The door hardware is in excellent condition. Each doorknob is 2 ¼” in diameter and 2 ¼” deep; the backplates are 2 3/8” by 8 ½”. NDKS32   « Less

This is a marvelous antique cast bronze “Windsor” pocket door set by Reading Hardware, circa 1885. The set includes the ornamented lock and two faceplates,  More »

This is a marvelous antique cast bronze “Windsor” pocket door set by Reading Hardware, circa 1885. The set includes the ornamented lock and two faceplates, ornamented with the distinctive Windsor design of stylized leaves and bands of circles. The plates and the handles are in their original finish with a darkened background and lighter highlights. The set is in excellent condition and functions beautifully. The backplates are 2 1/8” wide and 4 7/8” long; the faceplate on the lock is 5 5/8” long by 15/16” wide. NPDP10-RW   « Less