Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience/gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which  More »

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience/gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.2437)   « Less

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.2442)   « Less

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.2447)   « Less

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.2448)   « Less

Created during the age of David and Solomon, this simple but charming vessel glows with the rich patina of history. Who can say through whose hands it might have passed  More »

Created during the age of David and Solomon, this simple but charming vessel glows with the rich patina of history. Who can say through whose hands it might have passed centuries ago? It was perhaps from such a jug that Samuel anointed Saul king of Israel. Whatever its past, we are aware that it was crafted by ancient hands, held and used by people who lived in a time and place much different from our own. The energy of those vanished lives clings to it still and sets our imaginations stirring. - (P.3748)   « Less

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.2451)   « Less

This sturdy, simple vessel may once have held an offering of wine or oil. To the vanished age that created it, it was perhaps an unremarkable vessel, notable more for its  More »

This sturdy, simple vessel may once have held an offering of wine or oil. To the vanished age that created it, it was perhaps an unremarkable vessel, notable more for its contents than its beauty. Yet, the passage of time has graced it with qualities it did not originally possess: it serves as a bridge to the past. We wonder whose hands crafted it, whose once grasped its handle and poured out its contents? As our fingers rest where theirs did so long ago, we recognize that the jug radiates still with the energetic glow of those ancient lives. - (P.3933)   « Less

Origin: Sinai, Egypt Circa: 1900 BC to 1100 BC Collection: Egyptian Style: Middle/New Kingdom Medium: Faience Most ancient Egyptian beads were made of faience, a  More »

Origin: Sinai, Egypt Circa: 1900 BC to 1100 BC Collection: Egyptian Style: Middle/New Kingdom Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.2453)   « Less

Created during the age of David and Solomon, this simple but charming vessel glows with the rich patina of history. Who can say through whose hands it might have passed  More »

Created during the age of David and Solomon, this simple but charming vessel glows with the rich patina of history. Who can say through whose hands it might have passed centuries ago? It was perhaps from such a jug that Samuel anointed Saul king of Israel. Whatever its past, we are aware that it was crafted by ancient hands, held and used by people who lived in a time and place much different from our own. The energy of those vanished lives clings to it still and sets our imaginations stirring. - (P.4286)   « Less

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1900 BC to 1100 BC Collection: Egyptian Medium: faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.2454)   « Less