Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a  More »

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. In the art of Ancient Egypt, we see lovely women adorned with such jewels. To wear these beads today is to follow in the royal tradition of Nefertiti and Cleopatra. - (FJ.4692)   « Less

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a  More »

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. In the art of Ancient Egypt, we see lovely women adorned with such jewels. To wear these beads today is to follow in the royal tradition of Nefertiti and Cleopatra. - (FJ.4693)   « Less

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a  More »

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. In the art of Ancient Egypt, we see lovely women adorned with such jewels. To wear these beads today is to follow in the royal tradition of Nefertiti and Cleopatra. - (FJ.4694)   « Less

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a  More »

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. In the art of Ancient Egypt, we see lovely women adorned with such jewels. To wear these beads today is to follow in the royal tradition of Nefertiti and Cleopatra. - (FJ.4695)   « Less

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a  More »

Origin: Sinai, Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Style: New Kingdom Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. In the art of Ancient Egypt, we see lovely women adorned with such jewels. To wear these beads today is to follow in the royal tradition of Nefertiti and Cleopatra. - (FJ.4696)   « Less

Faience Bead Necklace - FJ.4709 Medium: Faience

Faience Bead Necklace - FJ.4709 Medium: Faience   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. In the art of Ancient Egypt, we see lovely women adorned with such jewels. To wear these beads today is to follow in the royal tradition of Nefertiti, Tutankhamen and Cleopatra. - (FJ.4726)   « Less

Egyptian Faience and Natural Baltic Amber Bead Necklace - FJ.5423 Origin: Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience/Amber

Egyptian Faience and Natural Baltic Amber Bead Necklace - FJ.5423 Origin: Egypt Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience/Amber   « Less

Origin: Sinai, Egypt Circa: 1900 BC to 1300 BC Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as  More »

Origin: Sinai, Egypt Circa: 1900 BC to 1300 BC Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (SB.0095)   « Less

Origin: Sinai, Egypt Circa: 1900 BC to 1300 BC Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as  More »

Origin: Sinai, Egypt Circa: 1900 BC to 1300 BC Medium: Faience Most Ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, such beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coated with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red, yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (SB.0124)   « Less