Origin: Egypt (Sinai) Circa: 1600 BC Collection: Egyptian-Roman Medium: Faience-Silver Additional Information: Necklace consisting of genuine Egyptian New Kingdom faience  More »

Origin: Egypt (Sinai) Circa: 1600 BC Collection: Egyptian-Roman Medium: Faience-Silver Additional Information: Necklace consisting of genuine Egyptian New Kingdom faience beads, five rock crystal beads of the Roman period and a sterling silver clasp. Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1090)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1091)   « Less

Origin: Egypt-Lebanon (Sinai,Tripoli) Circa: 1600 BC to 300 BC Collection: Egyptian-Roman Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a  More »

Origin: Egypt-Lebanon (Sinai,Tripoli) Circa: 1600 BC to 300 BC Collection: Egyptian-Roman Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1092)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian-Roman Medium: Faience-Silver Additional Information: Necklace consisting of genuine Egyptian New  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian-Roman Medium: Faience-Silver Additional Information: Necklace consisting of genuine Egyptian New Kingdom faience beads, five rock crystal beads of the Roman period and a sterling silver clasp. Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1093)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 300 BC Collection: Egyptian-Roman Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 300 BC Collection: Egyptian-Roman Medium: Faience-Gold Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1098)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Additional Information: Necklace consisting of genuine Egyptian New Kingdom  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Gold Additional Information: Necklace consisting of genuine Egyptian New Kingdom faience beads, an 18 karat gold Sacred Eye of Horus, and an 18 karat gold clasp. Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1103)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 300 AD Collection: Egyptian-Roman Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 300 AD Collection: Egyptian-Roman Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1104)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1319)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Additional Information: sold A Most ancient Egyptian beads were made of  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Additional Information: sold A Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1321)   « Less

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze  More »

Origin: Egypt (Sinai) Circa: 1600 BC to 1100 BC Collection: Egyptian Medium: Faience-Silver Most ancient Egyptian beads were made of faience, a glass-composite glaze which was introduced as early as the Pre-Dynastic period. According to Egyptologists, most beads were made on an axis, probably of thread, which would burn up during firing, leaving a hole. Disc, ring and tubular beads were made by coating the axis with the unfired body-paste, rolling the cylinder to an even diameter on a flat surface, and then scoring it with a knife into sections of the desired length. Other shapes, such as ball beads, were rolled between the hands and perforated while still wet with a stiff point such as a wire needle. The beads were then dried, coating with glaze (if the glaze had not already been mixed with the paste), and fired. The firing process often gave the beads a beautiful translucent quality. The majority of faience beads are blue or green in color, but black, red yellow and white ones were also produced, especially in the New Egyptian Kingdom. - (FJ.1324)   « Less