Antiques
|
|
|
|
|
Price :
$1850.00
We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed More »
We bought eight of these fantastic, very large, outdoor lights from one estate. They are simply a wow for impressions. Made from a brass/bronze material, they do have a mixed reddish bronze finish and the detail for these old castings, meant for outside, is pretty good with some age considerations. They do vary a bit as all old castings will.
We have totally rewired these and also added a water protection fitter which helps channel rainwater away. We changed the poorly designed mounting options and now they mount with 3 lag bolts that have decorative theft deterrent caps. You can see the 3 caps that go over the lag bolts, on the back plate. There are three of them. These sconces are big and heavy and get bigger and heavier with the shades that are chosen to go with them.
Measurements: The backplate is 21" tall by 9" max wide before shades are added. The light protrudes 15" before shades are added.
ANT-262-FLM is simply for folks who desire an outrageous flame shaded architectural light and have funds budgeted for it. This shade is pretty expensive and the fitter has to be changed from a 6" fitter to an 8" fitter. But the results are rather superb.
The shade, by itself, is 17" tall with a diameter of about 10". Using this shade, the resulting fixture becomes 30" tall by about 10" wide and projects 16". We can coat the shade for an amber appearance if desired. Price: $1,850.00 plus shipping. This does include the fantastic giant flame shade either frosted or amber treated.
At this time, we have two of these fixtures only. When they are gone...they are gone. « Less
|
Antique Exterior Lighting
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$935.00
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed as More »
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed as GAS and Electric sconces, like the interior chandeliers made at this time when electrical supplies were spotty at best. Looking on top of the sconce, you can see the gas valve with teeter lever valve which could be opened and closed using a long gas lighter's pole.
The overall height of this great sconce with the chain long is 38", while it's width is 9 1/4". It projects outwards 20". On the short chain fixture, the chain is about 5 inches shorter.
To get an idea of just how large these great lights are, please note the 12" ruler that is included in the pictures.
The original ball shade has a 6" fitter and is much thicker than the re-creations that are made today. It is just amazing that it has survived about 100 years.
This could quite easily accept a 250 watt light bulb or the new induction type bulbs.
We have removed all the rust and replaced perished screws. These fixtures have been re-wired to UL standards and are ready to mount. We are offering the ten fixtures, taken from an estate, finished in either an aunatural Iron and Brass ...or...finishing them in a Semi-Gloss black. When these fixtures are gone, as they say...they are gone. Only ten were pulled from a lovely estate courtyard.
Measurements: Backplate measures: Height: 20 11/16" x Width: 6 3/4". OA Height: 38" x W 9 1/4". Projects 20". Fitter size 6".
Price $935.00 plus shipping charges. Yes, it comes complete with the round globe shade. « Less
|
Antique Exterior Lighting
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$935.00
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed as More »
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed as GAS and Electric sconces, like the interior chandeliers made at this time when electrical supplies were spotty at best. Looking on top of the sconce, you can see the gas valve with teeter lever valve which could be opened and closed using a long gas lighter's pole.
The overall height of this great sconce with the chain long is 38", while it's width is 9 1/4". It projects outwards 20". On the short chain fixture, the chain is about 5 inches shorter.
To get an idea of just how large these great lights are, please note the 12" ruler that is included in the pictures.
The original ball shade has a 6" fitter and is much thicker than the re-creations that are made today. It is just amazing that it has survived about 100 years.
This could quite easily accept a 250 watt light bulb or the new induction type bulbs.
We have removed all the rust and replaced perished screws. These fixtures have been re-wired to UL standards and are ready to mount. We are offering the ten fixtures, taken from an estate, finished in either an aunatural Iron and Brass...or...finishing them in a Semi-Gloss black. When these fixtures are gone, as they say...they are gone. Only ten were pulled from a lovely estate courtyard.
Measurements: Backplate measures: Height 20 11/16" x Width 6 3/4". OA Height 38" x W 9 1/4". Projects 20". Fitter size 6".
Price $935.00 plus shipping charges. Yes, it comes complete with the round globe shade. « Less
|
Antique Exterior Lighting
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$935.00
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed More »
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed as GAS and Electric sconces, like the interior chandeliers made at this time when electrical supplies were spotty at best. Looking on top of the sconce, you can see the gas valve with teeter lever valve which could be opened and closed using a long gas lighter's pole.
The overall height of this great sconce with the chain long is 38", while it's width is 9 1/4". It projects outwards 20". On the short chain fixture, the chain is about 5 inches shorter.
To get an idea of just how large these great lights are, please note the 12" ruler that is included in the pictures.
The original ball shade has a 6" fitter and is much thicker than the re-creations that are made today. It is just amazing that it has survived about 100 years.
This could quite easily accept a 250 watt light bulb or the new induction type bulbs.
We have removed all the rust and replaced perished screws. These fixtures have been re-wired to UL standards and are ready to mount. We are offering the ten fixtures, taken from an estate, finished in either an aunatural Iron and Brass ...or...finishing them in a Semi-Gloss black. When these fixtures are gone, as they say...they are gone. Only ten were pulled from a lovely estate courtyard.
Measurements: Backplate measures: Height 20 11/16" x Width 6 3/4". OA Height 38" x W 9 1/4". Projects 20". Fitter size 6".
Price $935.00 plus shipping charges. Yes, it comes complete with the round globe shade. « Less
|
Antique Exterior Lighting
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$935.00
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed as More »
Hard to find Arts and Crafts LARGE garden or outside social sconces. We have seen similar ones used in home theaters for a nice effect.
Circa 1900, they were constructed as GAS and Electric sconces, like the interior chandeliers made at this time when electrical supplies were spotty at best. Looking on top of the sconce, you can see the gas valve with teeter lever valve which could be opened and closed using a long gas lighter's pole.
The overall height of this great sconce with the chain long is 38", while it's width is 9 1/4". It projects outwards 20". On the short chain fixture, the chain is about 5 inches shorter.
To get an idea of just how large these great lights are, please note the 12" ruler that is included in the pictures.
The original ball shade has a 6" fitter and is much thicker than the re-creations that are made today. It is just amazing that it has survived about 100 years.
This could quite easily accept a 250 watt light bulb or the new induction type bulbs.
We have removed all the rust and replaced perished screws. These fixtures have been re-wired to UL standards and are ready to mount. We are offering the ten fixtures, taken from an estate, finished in either an aunatural Iron and Brass ...or...finishing them in a Semi-Gloss black. When these fixtures are gone, as they say...they are gone. Only ten were pulled from a lovely estate courtyard.
Measurements: Backplate measures: Height 20 11/16" x Width 6 3/4". OA Height 38" x W 9 1/4". Projects 20". Fitter size 6".
Price $935.00 plus shipping charges. Yes, it comes complete with the round globe shade. « Less
|
Antique Exterior Lighting
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$434.50
Art Deco 5 Light Chandelier with Original Shades. Circa 1938.
The metal finish is a light pewter look. Looking at this fixture we see Arts & Crafts influences as well More »
Art Deco 5 Light Chandelier with Original Shades. Circa 1938.
The metal finish is a light pewter look. Looking at this fixture we see Arts & Crafts influences as well as Art Deco motifs.
The original shades are simple frosted finish with an embossed design around the center.
Measurements: 17 1/2" tall with a diameter of 19 1/2". Could be made longer by adding chain links.
The chandelier has been totally rewired with high grade sockets and new central lead wire. Sockets are UL approved for up to 100 watts incandescent. Lighting: Up to 500 total watts.
Price: $434.50 plus shipping. « Less
|
Antique Chandeliers
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$475.00
ANT-268 Art Deco Lincoln 5 Light Chandelier with Original Shades.
Not every chandelier made during the Depression in Art Deco style was a slip shade light. This is a fine More »
ANT-268 Art Deco Lincoln 5 Light Chandelier with Original Shades.
Not every chandelier made during the Depression in Art Deco style was a slip shade light. This is a fine example of an Art Deco chandelier with its original glass shades, made by Lincoln manufacturing circa 1938.
The finish is totally original. Old copper/copper-bronze finish. Very striking. Pictures seem to be showing a mostly "old gold" color...but there really is more of a copper touch to this finish than "old gold".
This fixture could be lengthened or shortened by adding/subtracting chain links.
The chandelier has been totally rewired with high grade sockets and new central lead wire. Sockets are UL approved for up to 100 watts incandescent, up to 500 total incandescent watts.
Measurements: 25 1/2" tall with the chain as shown. Can be shortened to 20" by removing all but one chain link. It has a diameter of 18 1/2".
Comes complete with original shades and ready to hang.
Price: $475.00 plus shipping. « Less
|
Antique Chandeliers
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$325.00
ANT-272 Lovely pair of Circa 1920 wall sconces.
Original backplates and original shades.
These sconces have a lovely Edwardian pewter look and a great design that is so More »
ANT-272 Lovely pair of Circa 1920 wall sconces.
Original backplates and original shades.
These sconces have a lovely Edwardian pewter look and a great design that is so typical of the Edwardian style.
The original shades are very nice. A frosted center set off by two sections of amber. Due to their age, there is a place "or two" where there are very MINOR flakes to the shades where they fit into the holder (not seen). It is normal 90 year wear & tear and so very minor, but we have to mention it.
The metal of the backplates is cast white metal with a lovely pewter finish. Ready to go...nothing needs to be done except add the light bulbs of your choice. These sconces have been completely re-wired with new sockets and all new wire. We have also replaced the switches, made by Leviton in the 20's...and still made up to ONE year ago. So these switches by Leviton are becoming more rare as we note this.
Measurements: The overall sconce height is 11 3/4". The maximum width (shade) is 5 3/4". It will project into the room 6" from the wall.
$325.00 for the pair, plus shipping. « Less
|
Antique Sconces
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
Vintage Hardware & Lighting |
2000 W Sims Way |
Port Townsend |
Washington-98368 |
USA |
Email : sales@vintagehardware.com |
Phone : 360-379-9030 |
|
|
|
|
|
Price :
$675.00
Wonderful salvaged antique arched plank door with a small arch window. This exterior door features gorgeous decorative iron strap hinges on one side. There is some damage to More »
Wonderful salvaged antique arched plank door with a small arch window. This exterior door features gorgeous decorative iron strap hinges on one side. There is some damage to the door's lock area as shown, but it is easily repairable. The door is 36" wide, 83-1/2" tall, and 1-3/4" thick.
NED104-RW « Less
|
Antique Windows & Doors
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
The Preservation Station |
1809 8th Avenue South |
Nashville |
Tennessee-37203 |
USA |
Email : info@thepreservationstation.com |
Phone : (615) 292 3595 |
|
|
|
|
|
Price :
$545.00
Salvaged antique door with two vertical bottom panels and three upper window panels of beveled glass. There is some wear to the door, as pictured. This exterior door measures More »
Salvaged antique door with two vertical bottom panels and three upper window panels of beveled glass. There is some wear to the door, as pictured. This exterior door measures 36" wide, 83-3/4" tall, and 1-3/4" thick.
NED107-RW « Less
|
Antique Windows & Doors
|
Vendor Details
|
|
ITEM IS NO LONGER AVAILABLE |
|
|
Vendor Details |
Close |
Contact Info : |
The Preservation Station |
1809 8th Avenue South |
Nashville |
Tennessee-37203 |
USA |
Email : info@thepreservationstation.com |
Phone : (615) 292 3595 |
|
|
|
|
|
|
|
|