A fabulous pair of antique brass single-arm sconces with tassels, c. 1920’s. Each sconces features a smooth, oval backplate; the sconce arm features a triad of leaves  More »

A fabulous pair of antique brass single-arm sconces with tassels, c. 1920’s. Each sconces features a smooth, oval backplate; the sconce arm features a triad of leaves at the bottom and comes up to a simple bobeche with a tassel finial. These wall lamps are in very good antique condition with working switches; there is a tiny hairline in one of the backplates (pictured) that is barely noticeable. They have been professionally rewired and come with all the necessary attachments for modern installation. The sconces measure 10 ½” tall, 4” wide, and project 4 ½” from the wall. NSP591-RW   « Less

A wonderful pair of antique brass sconces with their original glass shades, dating from the 1920’s. Each sconce has an oval backplate with an acanthus-leaf arm that  More »

A wonderful pair of antique brass sconces with their original glass shades, dating from the 1920’s. Each sconce has an oval backplate with an acanthus-leaf arm that comes up to support a simple dangling shade holder with a glass shade. The shades feature a graceful scallop design around the top and bottom. These wall lamps are in excellent condition; the glass is in very good antique condition with a few chips around the edges as shown. They have been professionally rewired and come with all the necessary attachments for modern installation. Each sconce is 4 3/8” wide, 11” tall, and projects 5 ½” from the wall. NSP592-RW   « Less

Hard-to-find antique cast bronze door hardware sets by Mallory, Wheeler, & Co., patent dated 1884, in their unusual “Arabic” design. Each set includes a pair of  More »

Hard-to-find antique cast bronze door hardware sets by Mallory, Wheeler, & Co., patent dated 1884, in their unusual “Arabic” design. Each set includes a pair of door knobs, a pair of plates, one decorative mortise lock, and a rare decorative strikeplate (enough hardware for one door). The knobs and plates feature an Arabic character on a rippled background. The backplates and lock are signed “M.W.” This hardware is in very good to excellent condition, with the expected scratches on the strikeplates and some tiny nicks on the edge of one lock (pictured). Each doorknob is 2 ¼” in diameter and 2” deep; the backplates measure 1-11/16” by 5 1/4". The faceplates of the mortise locks are 5 ½” by 7/8”, and each lock has a backset of 2-3/8”. THE PRICE LISTED IS FOR EACH SET; THERE ARE NOW FOUR AVAILABLE. NDKS81-RW   « Less

Unusual antique Arts and Crafts door hardware sets, dating from the early 1900’s. The doorknobs feature a threefold design with leaves overlapping a simple border;  More »

Unusual antique Arts and Crafts door hardware sets, dating from the early 1900’s. The doorknobs feature a threefold design with leaves overlapping a simple border; the backplates are ornamented at the top and bottom with a matching leaf design and a triple border. Each plate is 7 ¾” by 2 ½”; the doorknobs are 2 ¼” in diameter and 2” deep. Each set includes a pair of plates and two knobs with the connecting spindle and screws (enough hardware for one door). THE PRICE LISTED IS FOR EACH SET; THERE IS ONE SET AVAILABLE. Antique mortise locks and modern latches are also available for use with this hardware. NDKS82-RW   « Less

A wonderful antique four-light chandelier, dating from the early 1900’s, with glass shades. The chandelier features a simple body with a beaded border around the top;  More »

A wonderful antique four-light chandelier, dating from the early 1900’s, with glass shades. The chandelier features a simple body with a beaded border around the top; the shades are ornamented with a floral design and a beaded lower edge. This light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The shades are in excellent condition with no cracks or breaks, just the expected fleabites around the rims. The chandelier body measures 23” wide and 10” tall (body only), and the fixture is 42” long overall. NC1013-RW   « Less

outdoor/indoor cement planter,carving, putti, grape garden surrounds snakes. excellent aged, magnificent patina. 6" h. x 7" w.

outdoor/indoor cement planter,carving, putti, grape garden surrounds snakes. excellent aged, magnificent patina. 6" h. x 7" w.   « Less

An amazing antique exterior lantern, dating from the early 1900’s with its original glue-chip glass. Made of cast iron, the sconce features a square backplate with a  More »

An amazing antique exterior lantern, dating from the early 1900’s with its original glue-chip glass. Made of cast iron, the sconce features a square backplate with a rope border. A volute arm supports the four-sided lantern, with panels of frost-like glue-chip glass. A torsade pattern runs down the roof and along the edges of the lantern, finishing in a heavy acorn finial. This wall lamp is in excellent condition, and the glass is in excellent condition with no cracks or breaks. The lantern has been professionally rewired; it measures 14” tall, 5 1/8” wide, and projects 8 ¾” from the wall. This porch light is suitable for either interior or exterior use. NSP594-RW   « Less

A fabulous pair of antique cast iron exterior sconces, dating from the early 1900’s. The sconces feature rectangular, cast iron backplates that blend into the sconce  More »

A fabulous pair of antique cast iron exterior sconces, dating from the early 1900’s. The sconces feature rectangular, cast iron backplates that blend into the sconce arm. The arm, ornamented with a simple “X” shape on the end, supports a faceted cast iron shade holder with a simple glass globe. These wall lamps are in excellent condition; the shades are also in excellent condition with just the expected fleabites around the rims. The sconces have been professionally rewired and come with all the necessary attachments for modern installation. Each sconce measures 13” tall, 6” wide, and projects 8” from the wall. NSP594-RW   « Less

A fabulous pair of antique cast bronze single-arm sconces with flowers, c. 1920’s. Each sconce features a hammered, shield-shaped backplate with a rope border,  More »

A fabulous pair of antique cast bronze single-arm sconces with flowers, c. 1920’s. Each sconce features a hammered, shield-shaped backplate with a rope border, crowned with a pair of flowers on stems. The sconce arm supports a shallow foliate bobeche. These wall lamps are in excellent condition; they have been professionally rewired and come with all the necessary attachments for modern installation. The sconces measure 10 ¾” tall, 4 5/8” wide, and project 5” from the wall. NSP595-RW   « Less

A stunning antique entry cast bronze door hardware set in P. & F. Corbin’s “Tivoli” pattern, featured in the 1905 Corbin catalog. The doorknobs feature a  More »

A stunning antique entry cast bronze door hardware set in P. & F. Corbin’s “Tivoli” pattern, featured in the 1905 Corbin catalog. The doorknobs feature a flower surrounded by acanthus leaves and ribbon, with a beaded border around the edge. The plates are ornamented with a beautifully cast anthemion on one end, surrounded by acanthus, with acanthus leaves and scrolls on the opposite end. The plates have a bead-and-reel border. The split-system lock has its original lock cylinder and escutcheon, and a cast bronze faceplate. This entrance door hardware is in excellent condition. The larger doorplate is 13” by 3 1/4”; the smaller plate is 7” by 2 1/4”; the larger doorknob is 2 ½” in diameter and 2 ¼” deep; the smaller doorknob is 2 ¼” in diameter and 2 ¼” deep. The faceplate on the lock is 9” by 1 ¼”. A matching, slightly smaller hardware set for a vestibule door or side door is also available, item # NDKS84-RW. NDKS83-RW   « Less