Antique door hardware sets, probably made by Sargent about 1910, with doorknobs and matching backplates. The knobs feature an unusual lattice-like design with a border of  More »

Antique door hardware sets, probably made by Sargent about 1910, with doorknobs and matching backplates. The knobs feature an unusual lattice-like design with a border of volutes and acanthus leaves. The plates feature a matching design, with a lattice center surrounded with intricately cast acanthus and volutes, crowned with an anthemion. Each set includes a pair of plates and a pair of knobs with the connecting spindle and set screws (enough hardware for one door). These doorknob sets are in excellent condition. The door knobs measure 2 1/4” in diameter and 2” deep; the plates are 9” x 2 3/8”. THE PRICE LISTED IS FOR EACH SET; THERE IS ONE SET AVAILABLE. NDKS69-RW   « Less

Two matching complete sets of antique Eastlake door hardware, including the door knobs with connecting spindle, backplates, and decorative mortise lock. Dating from the  More »

Two matching complete sets of antique Eastlake door hardware, including the door knobs with connecting spindle, backplates, and decorative mortise lock. Dating from the 1880’s, each set features cast iron doorknobs with a stylized flower and a zigzag border; the doorplates feature a coordinating design with stylized leaves, flowers, and geometric detail. A smaller repetition of the plate design ornaments the faceplate on the mortise lock. This set is in excellent condition. The doorknobs are 2 ¼” in diameter and 2” deep, and the backplates are 1 ½” wide and 5 ½” long. The faceplate of the lock measures 5 3/8” by 15/16”. A matching set is also available, item # NDKS61. THE PRICE IS FOR EACH SET; THERE ARE TWO AVAILABLE. NDKS70   « Less

Four matching 3.5” hinges in Reading Hardware’s “Windsor” pattern, dating from the 1880’s. These cast iron hinges are in their original,  More »

Four matching 3.5” hinges in Reading Hardware’s “Windsor” pattern, dating from the 1880’s. These cast iron hinges are in their original, hard-to-find bronze and black enamel finish. The three-knuckle hinges feature a distinctive geometric design with ball finials. These Eastlake hinges are in excellent condition; each measures 3 ½” by 3 ½”, and 5” overall (from finial to finial). A matching pair of 5” hinges is also available, item # NHP29-RW. THE PRICE IS FOR EACH PAIR; THERE ARE TWO PAIRS AVAILABLE. NHP26   « Less

A splendid antique five-tiered chandelier in its original silver plate, dating from the early 1900’s. This three-light “wedding cake” chandelier begins  More »

A splendid antique five-tiered chandelier in its original silver plate, dating from the early 1900’s. This three-light “wedding cake” chandelier begins descends in a chain to an elegant loop finial with leaves below. The chandelier body is ornamented with a bead-and-reel border and a design of interlocked hearts that support the first tier of prisms. Below, the chandelier has five tiers of sparkling “icicle” prisms, and is finished in a faceted crystal ball. This light fixture is in very good antique condition with a small dent in the canopy (pictured). It has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body is 16 ½” wide and 24” long; the fixture is approx. 43” long overall. A smaller matching chandelier is also available, item # NC933. NC998-RW   « Less

Orrefors crystal charming votive bubble candle holders in pair. etched marks, copyrighted bowl design. 4" h. x 5" w. x 2" d. excellent condition, quite heavy.

Orrefors crystal charming votive bubble candle holders in pair. etched marks, copyrighted bowl design. 4" h. x 5" w. x 2" d. excellent condition, quite heavy.   « Less

A wonderful antique bronze four-light chandelier, dating from the early 1900’s, with etched glass shades. The fixture begins with a simple bronze canopy, coming down  More »

A wonderful antique bronze four-light chandelier, dating from the early 1900’s, with etched glass shades. The fixture begins with a simple bronze canopy, coming down in pole to the chandelier body, ornamented halfway down with a beaded trumpet-shaped piece. The pole ends in a fluted orb-like piece, surrounded by a bronze band with four smooth chandelier arms projecting from it. Each arm ends in a simple shade holder with a flared hexagonal shade ornamented with an etched design. This light fixture is in excellent condition and the glass is also in excellent condition with no cracks or breaks, just the expected fleabites around the rims. The chandelier has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 20 ½” wide and 22” tall to the top of the trumpet-shaped piece, and the fixture is 43 5/8” long overall. NC999-RW   « Less

A charming antique one-light iron and brass pendant light, dating from the 1920’s. The chandelier begins with a polychrome brass loop formed of volutes; wrought iron  More »

A charming antique one-light iron and brass pendant light, dating from the 1920’s. The chandelier begins with a polychrome brass loop formed of volutes; wrought iron bands, fastened with small florets, form the chandelier body. The chandelier finishes in a dangling brass finial. This light fixture is in excellent condition; it has been professionally rewired and comes with all the necessary attachments for modern installation. The chandelier body measures 6 ¾” wide and 20” tall, and the fixture is 34 ½” long overall. NC1000-RW   « Less

Ten matching antique cast iron 3.5” x 3.5” hinges, dating from the 19th Century, with steeple finials. The three-knuckle hinges feature an elegant leaf and vine  More »

Ten matching antique cast iron 3.5” x 3.5” hinges, dating from the 19th Century, with steeple finials. The three-knuckle hinges feature an elegant leaf and vine design on a textured background, with an abstract design along the knuckles of the hinge on both the front and back. These Eastlake hinges are in excellent condition. Each hinge measures 3 ½” wide overall, 3 ½” tall, and 5 ¾” from finial to finial. THE PRICE IS FOR EACH PAIR; THERE ARE NOW FOUR PAIRS AVAILABLE. NHP34   « Less

A stunning pair of large antique 5” hinges in Reading Hardware’s “Windsor” pattern, dating from the 1880’s. These cast iron hinges are in  More »

A stunning pair of large antique 5” hinges in Reading Hardware’s “Windsor” pattern, dating from the 1880’s. These cast iron hinges are in their original, hard-to-find bronze and black enamel finish. The three-knuckle hinges feature a distinctive geometric design with unusual decorative steeple finials. These Eastlake hinges are in excellent condition; each measures 5” by 5”, and 7 7/8” overall (from finial to finial). Two matching pairs of 3.5” hinges are also available, item # NHP26. NHP29-RW   « Less

Antique Arts & Crafts door hardware sets with a triangular arch, dating from the early 1900’s, in an uncommon, distinctive design. Each set includes the doorknobs  More »

Antique Arts & Crafts door hardware sets with a triangular arch, dating from the early 1900’s, in an uncommon, distinctive design. Each set includes the doorknobs with the connecting rod and set screws, and a pair of doorplates (enough hardware for one door). The backplates feature a triangular arch divided in thirds, with three panels at the bottom of the plate. The door knobs have a fivefold design of two concentric circles connected by five spokes. This door hardware is in very good antique condition; it has a nice patina with an aged texture. Each doorknob is 2 ¼” in diameter and 2” deep; the door plates are 2 ½” by 7 5/8”. This hardware can be used with either one of our modern latch sets or an antique mortise lock. THE PRICE LISTED IS FOR EACH SET; THERE IS ONE AVAILABLE. NDKS71-RW   « Less