Antique Glossary
A pretty and small writing desk with a sloping front, usually supported by ornate legs, with a series of drawers down one side, and false drawers on the opposite side. So called because the first one was ordered by one Capt. John Davenport in the late 1790s. Some examples have a writing surface which slides forwards as opposed to a fall-front , and quite a few harlequin examples exist. In the US, this is a term for a sort of sofa, or day bed, specifically with a head rest.
Tin-glazed earthenware from England or the Low Countries.
Afrieze moulding of small rectangular blocks in an equidistant series resembling teeth. Taken from the Ionic and Corinthian orders, such moulding is often used to ornament a cornice .
A mid-sized spoon made from about 1750 onwards, usually in sets.
The "face" of a clock, which shows the time.
A set of chairs comprising sides and two arms designed to go around a dining table.
A table designed exclusively for eating, usually large, often made in sections or to fold so that it could be made smaller when not in use.
A (usually) turned shallow depression in the top of a table, often a gaming table, in which case they are used for storing the money or chips, and are also known as guinea pockets. Also found on candlestands and such-like. The main purpose of it is to stop objects from slipping off; The term also applies to the shaping of the wooden seat of (say) a Windsor chair for comfort.
A term used to describe an object that has been artificially aged.
A rat tail spoon, whose finial is like that of a trefid with the notches eliminated, shaped like a dog's head when viewed from above. Dog nose spoons were made from c 1690-1710 in silver and pewter.
A term properly applied to a three-dimensional vault, but it also refers to the arched top of a late C17th/early C18th cabinet, and the tops of similar items such as or boxes etc.
A cabinet-maker's joint, fitting two pieces of wood together at right angles, in which a series of wedge-shaped projections (the 'dove's tail', hence the name) in one piece, fit into corresponding slots in the other. It is a strong joint, especially resistant to outward pull, hence often found on drawers. A Half-dovetail has one side (of both the protruding dovetail and the slot part) angled and the other straight; a Lapped-dovetail does not extend all the way through on one surface.
A small headless peg or pin of wood used in cabinet-making for securing a joint, or to mount finials snd suchlike.
The name derives from the original use of these, which was a piece of furniture on which food was "dressed". They appear inn two forms, low-dressers, and high-dressers. The former are simply a sideboard-type piece, whereas the latter, sport racks or shelves above the "sideboard".
A hinged extension flap to a table, dropping vertically when not in use, which can be supported horizontally by a swing leg , a fly bracket or a loper . It's often made using a rule joint , but may be a butt .
A table incorporating a drop leaf or leaves , sometimes called a 'flag table', and includes such tables as Pembrokes ,Sutherlands ,sofas and gatelegs .
Repeated pendants beneath a rail, in some cases it will form an apron . It's occasionally used as another term for a chain (see Finial ).
A circular-topped table with a frieze containing drawers and supported by a central pedestal.
A thin board, generally of softwood, fixed to the rails between the drawers of a chest. Its purpose, of course, is to keep dust off the contents of the drawers.
The style period from 1715-1760. Characterized by the increasing use of mahogany and the introduction of Chippendale style.
Stained black in imitation of ebony.
The view of the grain at the end of a piece of timber, such as is seen when timber is cut across the grain direction (traverse).
In Classical architecture, it's the sum of the mouldings (or the beam) above columns, composed of the architrave ,frieze , and the cornice .
Basically, it's any applied metal plate, but the term mainly applies to the pivoting metal guard or plate found over over a keyhole, and, properly, to the keyhole surround itself. Also, used as a term for the plate bearing the maker's name